Physics, 07.08.2019 00:10 goblebrandon
Avolumetric flask made of pyrex is calibrated at 20.0°c. it is filled to the 150-ml mark with 34.5°c acetone. after the flask is filled, the acetone cools and the flask warms so that the combination of acetone and flask reaches a uniform temperature of 32.0°c. the combination is then cooled back to 20.0°c. (the average volume expansion coefficient of acetone is 1.50 10-4(°c)−1.) (a) what is the volume of the acetone when it cools to 20.0°c?
Answers: 2
Physics, 22.06.2019 02:00
What is created when solids,liquids,an gases mix with one another
Answers: 1
Physics, 22.06.2019 07:00
Hen a gfci receptacle device is installed on a 20-ampere branch circuit (12 awg copper), what is the minimum volume allowance (in cubic inches) required for conductor fill for each conductor in the outlet box?
Answers: 1
Physics, 22.06.2019 16:50
Aresistor with an unknown resistance is connected in parallel to a 9 ω resistor. when both resistors are connected in parallel to an emf source of 21 v, the current through the unknown resistor is measured with an ammeter to be 4 a. what is the resistance of the unknown resistor? answer in units of ω.
Answers: 3
Physics, 22.06.2019 18:30
A1000-kg car is moving at 30 m/s around a horizontal unbanked curve whose diameter is 0.20 km. what is the magnitude of the friction force required to keep the car from sliding?
Answers: 3
Avolumetric flask made of pyrex is calibrated at 20.0°c. it is filled to the 150-ml mark with 34.5°c...
Social Studies, 22.10.2020 02:01
Mathematics, 22.10.2020 02:01
History, 22.10.2020 02:01
Mathematics, 22.10.2020 02:01
Mathematics, 22.10.2020 02:01
Mathematics, 22.10.2020 02:01
Social Studies, 22.10.2020 02:01
Biology, 22.10.2020 02:01
History, 22.10.2020 02:01
Computers and Technology, 22.10.2020 02:01
Spanish, 22.10.2020 02:01