subject
Physics, 17.08.2019 22:20 gabbyypadron

Measure the strength of the electric field 0.5 m directly above the midpoint as well as 1 m directly above. does the strength of the electric field decrease as 1 over distance squared (1/r2)?

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 06:00
The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒
Answers: 3
question
Physics, 22.06.2019 22:20
A10-kg piece of aluminum sits at the bottom of a lake, right next to a 10-kg piece of lead, which is much denser than aluminum. which one has the greater buoyant force on it? explain. b - the aluminum a) both have the same buoyant force. b) the aluminum c) the lead d) it cannot be determined without knowing their volumes.
Answers: 1
question
Physics, 22.06.2019 23:20
Consider each of the electric- and magnetic-field orientations given next. in each case, what is the direction of propagation of the wave? a)\vec ein the +xdirection,\vec bin the +ydirection. choose+ x direction- x direction+ y direction- y direction+ z direction- z direction b)\vec ein the -y direction,\vec bin the +x choose+ x direction- x direction+ y direction- y direction+ z direction- z direction c)\vec ein the +z direction,\vec bin the -x direction. choose+ x direction- x direction+ y direction- y direction+ z direction- z direction d)\vec ein the +y direction,\vec bin the -z direction. choose+ x direction- x direction+ y direction- y direction+ z direction- z direction
Answers: 3
question
Physics, 22.06.2019 23:40
To place a communications satellite into a geosynchronous orbit at an altitude of 22,240 mi above the surface of the earth, the satellite first is released from a space shuttle , which is in a circular orbit at an altitude of 185 mi, and then is propelled by an upper-stage booster to its final altitude. as the satellite passes through a, the booster's motor is fired to insert the satellite into an elliptic transfer orbit. the booster is again fired at b to insert the satellite into a geosynchronous orbit. knowing that the second firing increases the speed of the satellite by 4810ft/s, determine (a.) the speed of the satellite as it approaches b on the elliptic transfer orbit, (b.) the increase in speed resulting from the first firing at a.
Answers: 2
You know the right answer?
Measure the strength of the electric field 0.5 m directly above the midpoint as well as 1 m directly...
Questions
question
Biology, 23.02.2021 05:50
question
Health, 23.02.2021 05:50
question
Mathematics, 23.02.2021 05:50
Questions on the website: 13722367