Physics, 21.08.2019 18:20 neariah24

In a section of horizontal pipe with a diameter of 3.00 cm the pressure is 5.21 kpa and water is flowing with a speed of 1.50 m/s. the pipe narrows to 2.50 cm. what is the pressure in the narrower region if water behaves like an ideal fluid of density 1000 kg/m3?

Answers: 1

Show answers

Answers

Answer from: sandy3711

The pressure at the narrower region reduces to 4.00 kPa

Explanation:

According to Bernoulli's theorem for an ideal fluid we have we have

$\frac{P}{\gamma _{w}}+\frac{v^{2}}{2g}+z=constant$

Applying this between the two sections under consideration we obtain

$\frac{P_{1}}{\gamma _{w}}+\frac{v_{1}^{2}}{2g}+z_{1}=\frac{P_{2}}{\gamma _{w}}+\frac{v_{2}^{2}}{2g}+z_{2}$

Now by equation of contuinity we have

$A_{1}v_{1}=A_{2}v_{2}$

$\therefore v_{2}=\frac{A_{1}v_{1}}{A_{2}}\\\\\therefore v_{2}=\frac{1.5\times 0.25\times \pi \times (3)^{2}}{0.25\times \pi \times (2.50)^{2} }\\\\\therefore v_{2}=2.16m/s$

Applying values in the bernoulli's equation and noting that $z_{1}=z_{2}$ we get

$\frac{P_{2}}{\gamma _{w}}=\frac{5.21\times 10^{3}}{1000\times 9.81}+\frac{1.50^{2}}{2g}-\frac{2.16^{2}}{2g}\\\\\therefore \frac{P_{2}}{\gamma _{w}}=0.40797\\\\\therefore P_{2}=4.00kPa$

Answer from: keltaylor

PB=4.0022kPA

Explanation:

For an ideal fluid (water in this case) we can use the Bernoulli equation to solve this exercise.

For two different points A and B inside an ideal fluid we can write that :

$PA+\frac{1}{2}.(D).(VA)^{2}+(D).(g).(hA)=PB+\frac{1}{2}.(D).(VB)^{2}+(D).(g).(hB)$

Where P is the pressure in that point.

Where D is the density of the fluid.

Where V is the speed of the fluid at that point.

Where g is the acceleration due to gravity.

Where h is the hight respect to a comparison plane.

The Bernoulli equation is an energy equation.

PA represents the energy due to pressure in the point A.

$\frac{1}{2}.(D).(VA)^{2}$ represents the kinetic energy in the point A.

And (D).(g).(hA) represents the potential energy in the point A.

We are going to use another equation. Given that we are considering the water as an ideal fluid, the flow is constant in the pipe.

Q=S.V

Q is the flow.

S is the section of the pipe and V is the speed of the fluid

Given that is constant, between two points A and B inside the pipe :

QA=QB ⇒

(SA).(VA)=(SB).(VB) (I)

The section of the pipe given its diameter can be calculated as :

$S=\frac{\pi (d)^{2}}{4}$

Where d is the diameter in that section.

Now, we write the Bernoulli equation between the two points. Given that this is a horizontal pipe, the potential energy term will be canceled because the two points will have the same potential energy respect to a comparison plane.

$PA+\frac{1}{2}.(D).(VA)^{2}=PB+\frac{1}{2}.(D).(VB)^{2}$ (II)

If we use (I) :

(SA).(VA)=(SB).(VB) ⇒ $VB=\frac{(SA).(VA)}{(SB)}=\frac{\frac{\pi (dA)^{2}}{4}.(VA)}{\frac{\pi (dB)^{2}}{4}}$ ⇒

$VB=\frac{(dA)^{2}}{(dB)^{2}}.(VA)$ (III)

Using (III) in (II) :

$5.21kPa+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(VA)^{2}=PB+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(\frac{(dA)^{2}}{(dB)^{2}}.(VA))^{2}$

$5.21kPa+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(VA)^{2}=PB+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(\frac{dA}{dB})^{4}.(VA)^{2}$

$PB=5.21kPa+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(VA)^{2}-\frac{1}{2}.(1000\frac{kg}{m^{3}}).(\frac{dA}{dB})^{4}.(VA)^{2}$

$PB=5.21kPa+\frac{1}{2}.(1000\frac{kg}{m^{3}}).(VA)^{2}(1-(\frac{dA}{dB})^{4})$

Replacing the values of the diameters dA and dB we obtain that the pressure in B is

PB=4.0022kPa

Answer from: Quest

Sorting by the rock cycle

Answer from: Quest

answer and explanation;

composition refers to both the types of minerals within a rock and the overall chemical makeup of the rock while texture refers to the size and arrangement of the minerals or grains that make up a rock. both composition and texture can be used to classify rocks, such as igneous rocks. texture describes how the rock became solid or crystallized from liquid, melted rock. composition of a rock describes the minerals that make up a particular rock.

Another question on Physics

Physics, 21.06.2019 23:10

A248-g piece of copper is dropped into 390 ml of water at 22.6 °c. the final temperature of the water was measured as 39.9 °c. calculate the initial temperature of the piece of copper. assume that all heat transfer occurs between the copper and the water. remember, the density of water is 1.0 g/m

Answers: 1

Answer

Physics, 22.06.2019 02:30

Which type of bond is found between the atoms of a molecule? a. metallic b. delocalized electron c. covalent d. ionic

Answers: 1

Answer

Physics, 22.06.2019 12:10

Light traveling in water, nwater = 1.33, strikes a plastic block at an angle of incidence of 51.4°; part of the beam is reflected and part is refracted. if the index of refraction of the plastic is 2.0, what is the angle made by the reflected and refracted beams?

Answers: 2

Answer

Physics, 22.06.2019 18:30

An object in mechanical equilibrium is an object

Answers: 2

Answer

You know the right answer?

In a section of horizontal pipe with a diameter of 3.00 cm the pressure is 5.21 kpa and water is flo...

Questions