Two identical 20-mm thick plates are bolted to the top and bottom flange to form the built-up beam. if the beam is subjected to a shear force of v = 300 kn, determine the maximum spacing s of the bolts to the nearest mm if each bolt has a shear strength of 30 kn

Calculate the work done by an external agent during an isothermal compression of 1.00 mol of oxygen from a volume of 22.4 l at 10∘c and 1.0 atm pressure to 16.8l

A3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular? a 3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular?

Aweather balloon has a volume of 52.5 liters at a temperature of 252 k. the balloon is released and rises to an altitude where the temperature is 295 k. how does this temperature change affect the gas particle motion?