Physics, 04.09.2019 23:30 ravenl1001

Ahydraulic lift has a maximum fluid pressure of 500 kpa. what should the piston/cylinder diameter be in order to lift a mass of 850 kg?

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 02:30

Mass (kg) force (n) 5 25 10 50 15 75 20 100 a student was trying to find the relationship between mass and force. he placed four different masses on a table and pulled them using a spring scale. the table shows the different masses used in the experiment and the force required to pull each mass. the student concluded that more force was required to pull heavier objects. what comment would you make regarding his conclusion? a) no clear relation can be observed between mass and force from the data. b) there is a direct proportion between the mass and force listed in the table. c) gravity should have been taken into account while performing the experiment. d) there is an inverse proportion between the mass and force listed in the table.

Answers: 2

Answer

Physics, 22.06.2019 03:50

A30 kg weight lies on top of a massless piston of area a = 0.01 m2 the exterior air is at a (constant) p =1 atm and t = 27 c. the interior gas is 0.4 moles of (ideal) n2 and it has initial temperature 27.00 degrees c. 1. what is the initial pressure in the interior? a. 29.4 kpa b. 130.7 kpa c. 101.3 kpa the next three questions concern what happens when an amount of heat q is slowly added to the interior, raising the piston by 1 mm and raising the interior temperature to 27.40 c

Answers: 3

Answer

Physics, 22.06.2019 12:00

Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.

Answers: 1

Answer

Physics, 22.06.2019 20:30

You are doing a science experiment with a fahrenheit thermometer. your data must be in degrees celsius. if you measure a temperature of 125°f, what is this temperature in degrees celsius

Answers: 1

Answer

You know the right answer?

Ahydraulic lift has a maximum fluid pressure of 500 kpa. what should the piston/cylinder diameter be...

Questions