Physics, 12.09.2019 23:10 mat1413

B) the ripples have a wavelength of 15 mm. given that their frequency is 1.4 x 10-2 khz,
calculate their speed in m/s. show your working.
0.014

Answers: 3

Show answers

Answers

Answer from: Quest

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

Answer from: Quest

trig 15.3 cos

Answer from: Quest

Is a vector quantity that refers to "the rate at which an object changes its position." imagine a person moving rapidly - one step forward and one step back - always returning to the original starting position. while this might result in a frenzy of activity, it would result in a zero velocity. because the person always returns to the original position, the motion would never result in a change in position. since velocity is defined as the rate at which the position changes, this motion results in zero velocity. if a person in motion wishes to maximize their velocity, then that person must make every effort to maximize the amount that they are displaced from their original position. every step must go into moving that person further from where he or she started. for certain, the person should never change directions and begin to return to the starting position.

Answer from: Quest

the chart show the masses and velocities of two colliding objects that stick together after a collision.

according to the law of conservation of momentum, the momentum of the object after the collision is

answer

1,500

kg • m/s.

Another question on Physics

Physics, 22.06.2019 17:20

The magnitude of the magnetic field at a certain distance from a long, straight conductor is represented by b. what is the magnitude of the magnetic field at twice the distance from the conductor? a. at twice the distance, the magnitude of the field is 4b.b. at twice the distance, the magnitude of the field is 2b.c. at twice the distance, the magnitude of the field is b/2.d. at twice the distance, the magnitude of the field is b/4.e. at twice the distance, the magnitude of the field remains equal to b.

Answers: 3

Answer

Physics, 22.06.2019 20:10

On a horizontal frictionless surface, a small block with mass 0.200 kg has a collision with a block of mass 0.400 kg. immediately after the collision, the 0.200 kg block is moving at 12.0 m/s in the direction 30° north of east and the 0.400 kg block is moving at 11.2 m/s in the direction 53.1° south of east. use coordinates where the +x-axis is east and the +y-axis is north.(a) what is the total kinetic energy of the two blocks after the collision (in ) what is the x-component of the total momentum of the two blocks after the collision? (indicate the direction with the sign of your ) what is the y-component of the total momentum of the two blocks after the collision? (indicate the direction with the sign of your answer.)

Answers: 1

Answer

Physics, 23.06.2019 01:30

At what time would the magnitude of the velocity reach 36.00 km/hr

Answers: 2

Answer

Physics, 23.06.2019 02:00

Consider an air-filled charged capacitor. how can its capacitance be increased?

Answers: 2

Answer

You know the right answer?

B) the ripples have a wavelength of 15 mm. given that their frequency is 1.4 x 10-2 khz,
calcu...