Aranger in a national park is driving at 52 km/h when a deer jumps onto the road 87 m ahead of the vehicle. after a reaction time of t s, the ranger applies the brakes to produce a deceleration of 4.0 m/s2 . what is the maximum reaction time allowed if the ranger is to avoid hitting the deer? answer in units of s.

Aprojectile is launched horizontally 10m above the ground and with an initial velocity of 15 m/s. a) sketch the trajectory using an appropriate coordination system. b) how long for the projectile to reach the ground. c) how far did projectile travel horizontally before striking the ground. d) determine the projectilex & y position at t-1.3s e) determine the magnitude and direction of projectile velocity at t= 1.3s f) determine the magnitude and direction of projectile acceleration at t-1.3s

In a steady-flow steam power plant system, two adiabatic high-pressure and low-pressure turbines ane used to generate power. superheated steam enters the high-pressure turbine at 8 mpa and 550°c. the steam expands in the high-pressure turbine to a saturated vapor at 3 mpa. in order to increase the powe generation of the power plant, another steam turbine working in a lower pressure ranges is deployed. the outlet vapor from the first turbine is heated up at a boiler to the temperature of 500 c at the constant pressure of first turbine's outlet (3 mpa). then, the vapor enters the second turbine and produces extra work. the exit conditions of the second turbine are 5o kpa and 90 percent quality. if the total power output of the power plant is 25 mw, determine a) the mass flow rate of the water (kg/s). b) heat transfer rate in the boiler (mw). (30 points) 3 mpa 00 c 8 mpa s0 c high pres turbine low pres boiler turbine 50 kpa 3 mpa 09 saturated vapor t heat engine, shown in the figure, operates between high temperature and low temperature of through a heat 4. a carnot tn and tu respectively. this heat engine receives energy from a heat reservoir at t exchanger where the heat transferred is proportional to the temperature difference as ? = k (z,-7, ). it rejects heat at a given low temperature tl. to design the heat engine for maximum work output, find the high temperature, th, as a function of tes and t. (15 points) qe

Aforce of 100 newtons is used to move an object a distance of 15 meters with a power of 50 watts. find the work dine and the time it takes to do the work