Physics, 28.09.2019 22:10 Jeli4264

What are the concepts of dynamically continuous innovation and discontinuous innovation? can you share examples to illustrate them in action?

Answers: 2

Show answers

Another question on Physics

Physics, 22.06.2019 13:40

An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.

Answers: 2

Answer

Physics, 22.06.2019 17:10

Both independent and dependent clauses

Answers: 2

Answer

Physics, 23.06.2019 02:10

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.

Answers: 1

Answer

Physics, 23.06.2019 05:40

What is the change in internal energy if 20 j of heat is released from a system and the system does 50 j of work on the surroundings? a. -70 j b. 30 j c. -30 j d. 70 j

Answers: 2

Answer

You know the right answer?

What are the concepts of dynamically continuous innovation and discontinuous innovation? can you sh...

Questions