Physics, 05.10.2019 04:00 vasqz283

Acharge of -2.65 nc is placed at the origin of an xy-coordinate system, and a charge of 2.00 nc is placed on the y axis at y = 3.80 cm a. if a third charge, of 5.00 nc , is now placed at the point x = 3.20 cm , y = 3.80 cm find the x and y components of the total force exerted on this charge by the other two charges.
b. find the magnitude of this force.
c. find the direction of this force

Answers: 1

Show answers

Answers

Answer from: shaw2708

A. Fnx = 5.71*10⁻⁵ N , Fny= -3.67*10⁻⁵ N

B. Fn= 6.78 *10⁻⁵ N

C. α= 32.4° counterclockwise with the positive x+ axis

Explanation:

Because the particle q₃ is close to two other electrically charged particles, it will experience two electrical forces and the solution of the problem is of a vector nature.

Equivalences

1nC= 10⁻⁹C

1cm = 10⁻²m

Known data

k= 9*10⁹N*m²/C²

q₁= -2.65 nC =-2.65*10⁻⁹C

q₂= +2.00 nC = 2*10⁻⁹C

q₃= +5.00 nC= =+5*10⁻⁹C

$d_{13} = \sqrt{(3.2)^{2} +(3.8)^{2} }$

$d_{13} =\sqrt{24.68}$ * 10⁻²m = 4.9678* 10⁻²m

(d₁₃)² = 24.68*10⁻⁴m²

d₂₃ = 3.2 cm = 3.2*10⁻²m

Graphic attached

The directions of the individual forces exerted by q₁ and q₂ on q₃ are shown in the attached figure.

The force (F₂₃) of q₂ on q₃ is repulsive because the charges have equal signs and the forces.

The force (F₁₃) of q₁ on q₃ is attractive because the charges have opposite signs.

Magnitudes of F₁₃ and F₂₃

F₁₃ = (k*q₁*q₃)/(d₁₃)²=( 9*10⁹*2.65*10⁻⁹*5*10⁻⁹) /(24.68*10⁻⁴)

F₁₃ = 4.8 *10⁻⁵ N

F₂₃ = (k*q₂*q₃)/(d₂₃)² = ( 9*10⁹*2*10⁻⁹*5*10⁻⁹) /((3.2)²*10⁻⁴)

F₂₃ = 8.8 *10⁻⁵ N

x-y components of F₁₃ and F₂₃

F₁₃x= -4.8 *10⁻⁵ *cos β= - 4.8 *10⁻⁵(3.2/ (4.9678)= - 3.09*10⁻⁵ N

F₁₃y= -4.8 *10⁻⁵ *sin β= - 4.8 *10⁻⁵(3.8/(4.9678) = - 3.67*10⁻⁵ N

F₂₃x = F₂₃ = +8.8 *10⁻⁵ N

F₂₃y = 0

x and y components of the total force exerted on q₃ by q₁ and q₂ (Fn)

Fnx= F₁₃x+F₂₃x = - 3.09*10⁻⁵ N+8.8 *10⁻⁵ N= 5.71*10⁻⁵ N

Fny= F₁₃y+F₂₃y = - 3.67*10⁻⁵ N+0= - 3.67*10⁻⁵ N

Fn magnitude

$F_{n} =\sqrt{(Fn_{x})^{2}+(Fn_{y})^{2} }$

$F_{n} = \sqrt{(5.71)^{2}+(3.67)^{2} }$ *10⁻⁵ N

Fn= 6.78 *10⁻⁵ N

Fn direction (α)

$\alpha =tan^{-1}( \frac{Fn_{y} }{Fn_{x} } )$

$\alpha =tan^{-1}( \frac{-3.67 }{5.71} )$

α= -32.4°

α= 32.4° counterclockwise with the positive x+ axis

Acharge of -2.65 nc is placed at the origin of an xy-coordinate system, and a charge of 2.00 nc is p

Answer from: Quest

as a general rule, scissors have blades less than 6 in (15 cm) long and usually have handles with finger holes of the same size. shears have blades scissors used to cut hair or fabric must be much sharper

Answer from: Quest

It may possibly be c i think |-/

Another question on Physics

Physics, 22.06.2019 01:20

An engineer designs a roller coaster so that a car travels horizontally for 152 ft, then climbs 137 ft at an angle of 34.0° above the horizontal. it then moves 137 ft at an angle of 48.0° below the horizontal. if we take the initial horizontal motion of the car to be along the +x-axis, what is the car's displacement? (give the magnitude of your answer, in ft, to at least four significant figures and give the direction of your answer in degrees counterclockwise from the +x-axis.)

Answers: 1

Answer

Physics, 22.06.2019 16:00

The solid that is formed and usually sinks to the bottom of a solution is the

Answers: 2

Answer

Physics, 22.06.2019 19:30

A1.5m wire carries a 2 a current when a potential difference of 52 v is applied. what is the resistance of the wire?

Answers: 1

Answer

Physics, 22.06.2019 20:40

Ablock of mass m = 2.5 kg is attached to a spring with spring constant k = 740 n/m. it is initially at rest on an inclined plane that is at an angle of theta= 26 with respect to the horizontal, and the coefficient of kinetic friction between the block and the plane is uk = 0.17. in the initial position, where the spring is compressed by a distance of d = 0.16 m, the mass is at its lowest position and the spring is compressed the maximum amount. take the initial gravitational energy of the block as zero. the block's initial mechanical energy is 9.472 j.b. if the spring pushes the block up the incline, what distance l in meters will the block travel before coming to rest? the spring remains attached to both the block and the fixed wall throughout its motion.

Answers: 3

Answer

You know the right answer?

Acharge of -2.65 nc is placed at the origin of an xy-coordinate system, and a charge of 2.00 nc is p...

Questions