Physics, 07.10.2019 18:20 brodybb5515

Alead bullet with 30-g of mass traveling at 600 m/s hits a thin iron wall and emerges at a speed of 300 m/s. suppose 50% of the heat generated is absorbed by the bullet, and the initial temperature of the bullet is 20°c. find the final phase and temperature of the lead bullet after the impact. the specific heat of the liquid lead can be assumed to be the same as that of the solid lead.

Answers: 3

Show answers

Answers

Answer from: jjuniorr

liquid state of lead T = 547ºC

Explanation:

The temperature change of the lead bullet can be found by the calorimetry equation

Q = m $c_{v}$ ΔT

Where heat is the energy transferred to lead during the crash, we can find average work

W = F x

With the crash it is very short we can use the average speed of the projectile during the crash

$v_{m}$ = ( $v_{f}$ + v₀) / 2 = (600 + 300) / 2

$v_{m}$ = 450 m / s

This speed of the projectile inside the wall is very inaccurate, but it is better than using any of the two speeds given (initial and final)

W = Δp vm

W = (m $v_{f}$ -m v₀) vm

W = m ( $v_{f}$ -v₀) vm

W = 30 10⁻³ (300-600) 450

W = 4050 J

As we have a shock let's use the momentum

I = F t = ΔP

F = Δp / t

Let's replace

W = (Dp / t) x

With the crash it is very short we can use the average speed of the projectile during the crash

$v_{m}$ = ( $v_{f}$ + v₀) / 2 = (600 + 300) / 2

$v_{m}$ = 450 m / s

This speed of the projectile inside the wall is very inaccurate, but it is better than using any of the two speeds given (initial and final)

W = Δp vm

W = (m $v_{f}$ -m v₀) vm

W = m ( $v_{f}$ -v₀) vm

W = 30 10⁻³ (300-600) 450

W = 4050 J

They tell us that 50% of the heat is absorbed by lead

Q = 50% W

Q = 2025 J

Let's calculate the temperature , the specific heat of lead is

cv = 128 J/kg ºC

Q = m $c_{v}$ Δt

ΔT = Q / m $c_{v}$

ΔT = 2025 / 3010⁻³ 128

$T_{f}$ = 547C

If we review the periodic table, the melting point of lead is 327.3ºC and the boiling point is 1726ºC, since it has a higher temperature than the lead must be in a liquid state

Answer from: Quest

yup its correct its: c) b b

Answer from: Quest

find the surface area of the sphere to the nearest square unit. use a calculator.

a. 254 in.2

b. 64 in.2

c. 127 in.2

d. 1,018 in.2

Another question on Physics

Physics, 22.06.2019 07:00

Photoelectrons with a maximum speed of 6.50 x 107 m/s are ejected from a surface in the presence of light with a frequency of 6.75 x 1014hz. if the mass of an electron is 9.10 x 10-31 kg, calculate in joules the maximum kinetic energy of a single electron. 3.84 x 10-15 j 1.92 x 10-15 j 5.92 x 10-23 j 3.07 x 10-16 j

Answers: 1

Answer

Physics, 22.06.2019 13:50

The magnitude of the poynting vector of a planar electromagnetic wave has an average value of 0.939 w/m^2 . the wave is incident upon a rectangular area, 1.5 m by 2.0 m, at right angles. how much total electromagnetic energy falls on the area during 1.0 minute?

Answers: 2

Answer

Physics, 23.06.2019 07:00

Auniform brick of length 25 m is placed overthe edge of a horizontal surface with a maximum overhang of 12.5 m attained withouttipping. now two identical uniform bricks of length25 m are stacked over the edge of a horizontalsurface. what maximum overhang is possible forthe two bricks (without tipping)? answer in units of m.

Answers: 2

Answer

Physics, 23.06.2019 08:30

Water moves to the top of tall trees because of a) capillary action b) surface tension c) capillary action and evaporation d) vapor pressure

Answers: 1

Answer

You know the right answer?

Alead bullet with 30-g of mass traveling at 600 m/s hits a thin iron wall and emerges at a speed of...

Questions