It is required to design a zener shunt regulator to provide a regulated voltage of about 10 v. the available 10-v, 1-w zener of type 1n4740 is specified to have a 10-v drop at a test current of 25 ma. at this current, its r z is 7 . the raw supply, v s , available has a nominal value of 20 v but can vary by as much as ±25%. the regulator is required to supply a load current of 0 ma to 20 ma. design for a minimum zener current of 5 ma.

Imagine you are riding on a yacht in the ocean and traveling at 20 mph. you then hit a golf ball at 100 mph from the deck of the yacht. you see the ball move away from you at 100mph, while a person standing on a near by beach would observe your golf ball traveling at 120 mph (20 mph + 100 mph). now imagine you are aboard the hermes spacecraft traveling at 0.1c (1/10 the speed of light) past mars and shine a laser from the front of the ship. you would see the light traveling at c (the speed of light) away from your ship. according to einstein’s special relativity, how fast will a person on mars observe the light to be traveling? a) 0.1c (1/10 the speed of light) b) c (the speed of light) c)1.1c (c+0.1c)

A3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular? a 3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular?

Engineers find a new metal that is stronger than steel but much lighter. this material is also significantly cheaper than what is currently used for most aircraft, available in large quantities, and easy to manufacture. the engineers are excited because this new material will lower the costs of buying and operating airplanes for companies. what is probably the best step for the engineers to make next?