In an important experiment used to determine the nature of atoms, a gas like hydrogen, neon or mercury is excited by sparking it with electricity. the light emitted is separated out into individual colors using a prism or diffraction grating and a few lines of colored light are seen. the light observed in such a spectrum is emitted when an electron in an atom

1) sections 1, 2, and 10 are significant primarily because they suggest the likelihood that a) widow wycherly is actually the woman in the full-length portrait. b) dr. heidegger wants to include his guests in an experiment with the water. c) dr. heidegger plans to drink some of the water from the vase and needs witnesses. d) the guests will be asked to witness dr. heidegger's transformation when he drinks the water.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Which configuration would produce an electric current? a) rotate a coil of copper wire between two magnets. b) connect a wire between a copper and zinc strip sitting in a beaker of water. c) connect a wire to the (+) positive end of a battery and the other end to a light bulb. d) connect a wire to the negative end of a battery and the other end to a light bulb.