Acar is traveling down the highway the driver decide to make a u-turn predict what changes must be made to the graph to reflect this situation.

a)the dotted like would need to be v-shaped

b)the dotted like would need to be vertical fro a certain amount of time.

c)the solid like would decrease for a short time and then increase again.

d)the solid line would need to become horizontal for a certain amount of time.

When fat comes in contact with sodium hydroxide, it produces soap and glycerin. determine whether this is a physical change or a chemical change. explain your answer

Space-time metric ds2= -dt2+at2dx2+bt2dy2+ct2dz2 (a)how does the area of a rectangle with vertices at ( x=0, y=0, z=0 ), (1,0,0 ), ( 0,1,0 ) and (1,1,0 ) changes with time? (b) if a photon moving in the x direction starts from the origin at t=1, when does it reach x=l? (ds=0 for the trajectory of a photon.) (c) the proper time for a particle is defined by cd=ds. what is the proper time for a particle to move along the trajectory ( x(t)=t, y(t)=0, z(t)=0 ) from t=0 to 1 ? what is the condition on the parameter a so that the velocity of the particle never exceeds the speed of light ?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)