subject
Physics, 23.10.2019 18:00 deena7

Aperson stands on a scale in an elevator. the maximum and minimum scale readings are 814.7 n and 321.8 n, respectively. the acceleration of gravity is 9.8 m/s 2 . assume the magnitude of the acceleration is the same during starting and stopping, and determine the weight of the person. answer in units of n.

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 00:30
Comedians like to joke that the reason we haven’t been visited by intelligent life from elsewhere in the universe is that aliens have been monitoring earth’s broadcasts of intellectually embarrassing tv programs, like gilligan’s island, fear factor, the jersey shore, and the jerry springer showand so consider us far too primitive to merit a visit. let’s check the assertion that aliens could have been receiving them. tv programs are broadcast at a frequency of about 100mhz with about 100kw of total power in 30frames per second, which emanatesroughly uniformly in all directions. assume that interstellar space transmits these broadcasts without attenuation. no matter how smart they are, aliens would require at least one photon per frame to interpret our signals. findthe number of photons per unit time per unit area reaching a receiver on a possible planet in the nearest star system, which is about 4 light-years away (a light-year is the distance light travels in a year). if aliens aimed a receiver or detector directly at earth, how big (in diameter) would it have to be to receive a photon per frame
Answers: 2
question
Physics, 22.06.2019 02:30
Awave travels at a speed of 5.2 m/s. if the distance between crests is 0.40 m, what is the frequency of the wave? use f=v/wavelength a. 13 hz b. 2.1 hz c. 0.077 hz d. 5.6 hz
Answers: 1
question
Physics, 22.06.2019 02:50
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)
Answers: 3
question
Physics, 22.06.2019 04:50
Two technicians are discussing a resistance measurement between the can-h and can-l wires. technician a says this measurement should be done with the ignition switch in the "run" position. technician b states that a measurement of 0 ohms indicates an open in the network. which technician is correct?
Answers: 1
You know the right answer?
Aperson stands on a scale in an elevator. the maximum and minimum scale readings are 814.7 n and 321...
Questions
question
Social Studies, 09.07.2019 05:30
question
Biology, 09.07.2019 05:30
Questions on the website: 13722367