Ametal bar with a rectangular cross section of height, h, and width, w, is fastened to a rigid wall with three pins. the pins will fail in shear at a stress level of τ fail. assuming that there is a gap, s, between the edge of the pin holes and the edge of the pins and that the pins are fixed to the wall, determine the change in temperature required to bring the end pins to the point of failure (assume direct shear failure). s = 2.5 mm h = 60 mm w = 45 mm diam_pin = 20 mm τ fail = 110 mpa l = 1.4 m α_bar = 17x10^-6/deg c e_bar = 200 gpa
Answers: 3
Physics, 21.06.2019 23:40
Aregular polygon has angkes of size 150° each.how many side has the polygon
Answers: 1
Physics, 22.06.2019 12:10
Two forces produce equal torques on a door about the door hinge. the first force is applied at the midpoint of the door; the second force is applied at the doorknob. both forces are applied perpendicular to the door. which force has a greater magnitude?
Answers: 2
Physics, 22.06.2019 14:30
Which one of the following terms is used to indicate the natural tendency of an object to remain at rest or in motion at a constant speed along a straight line? velocity acceleration equilibrium force inertia
Answers: 2
Ametal bar with a rectangular cross section of height, h, and width, w, is fastened to a rigid wall...
Geography, 26.10.2020 17:00
Biology, 26.10.2020 17:00
Mathematics, 26.10.2020 17:00
Mathematics, 26.10.2020 17:00
Mathematics, 26.10.2020 17:00