Physics, 08.11.2019 05:31 Jasten

Aslender rod is 80.0 cm long and has mass 0.390 kg . a small 0.0200-kg sphere is welded to one end of the rod, and a small 0.0500-kg sphere is welded to the other end. the rod, pivoting about a stationary, frictionless axis at its center, is held horizontal and released from rest.
what is the linear speed of the 0.0500-kg sphere as its passes through its lowest point?

Answers: 2

Show answers

Answers

Answer from: jessicagustama

Answer

given,

length of slender rod =80 cm = 0.8 m

mass of rod = 0.39 Kg

mass of small sphere = 0.0200 kg

mass of another sphere weld = 0.0500 Kg

calculating the moment of inertia of the system

$I = \dfrac{ML^2}{12}+\dfrac{m_1L^2}{4}+\dfrac{mL^2}{4}$

$I = \dfrac{0.39\times 0.8^2}{12}+\dfrac{0.02\times 0.8^2}{4}+\dfrac{0.05\times 0.8^2}{4}$

$I =0.032\ kg.m^2$

using conservation of energy

$\dfrac{1}{2}I\omega^2 = (m_1-m_2)g\dfrac{L}{2}$

$\omega=\sqrt{\dfrac{(m_1-m_2)gL}{I}}$

$\omega=\sqrt{\dfrac{(0.05-0.02)\times 9.8 \times 0.8}{0.032}}$

$\omega=2.71 \rad/s$

we know,

v = r ω

$v = \dfrac{L}{2} \times 2.71$

$v = \dfrac{0.8}{2} \times 2.71$

v = 1.084 m/s

Answer from: Quest

elly's long hair:

a. if the salon only takes cash, then this isn't the problem. it doesn't matter how much she has in her checking account. she can't get a haircut until she has the cash.

b. if she has overdraft protection, then there's no problem. she can go ahead and write a check that her account can't cover, then sometime later, pay the bank some outrageous usury for loaning her a few bucks for a few days, but with beautiful hair.

c. if elly has some principles, and doesn't want to write a bad check, then now she has a problem. her desire for the new hairstyle is in conflict with her honesty and integrity.

d. if the bank will not process a check she writes, then even if she had a million $$ in her account, she couldn't use any of it. the amount she has in her account is not the problem. and if i may suggest, she might as well close her checking account, and put the money where it'll work for her. it's not doing her a bit of good in a checking account, since she can't write any checks.

justin can't pay the full balance:

a. he can't even handle the credit limit he has now. under no circumstances should he ask for a higher limit.

b. he can ask for the grace period to be extended. but that's no solution, the bank will almost certainly refuse anyway, and there are much better options. he knew the rules of his credit card when he started using it.

c. he definitely should pay the interest on the balance, plus as much of the balance as he can cover at the same time.

d. he definitely should pay the minimum otherwise they could shut down his card. he should also pay as much more as he possibly can. he should also remember the awkward situation he's in, stop buying stuff on credit that he can't afford, and avoid adding any more debt.

i'd say that justin's best best option isn't on this list of choices. what he has to do: pay as much as he can at least the minimum payment plus as much more as he can and then avoid adding more debt.

Answer from: Quest

it is called kinetic energy

Another question on Physics

Physics, 21.06.2019 19:00

What is tan(61)? а. 1.80 b. 0.49 c. 0.61 d. 0.87

Answers: 1

Answer

Physics, 22.06.2019 00:40

Electroplating is a way to coat a complex metal object with a very thin (and hence inexpensive) layer of a precious metal, such as silver or gold. in essence the metal object is made the cathode of an electrolytic cell in which the precious metal cations are dissolved in aqueous solution. suppose a current of 480.ma is passed through an electroplating cell with an aqueous solution of agno3 in the cathode compartment for 46.0 seconds. calculate the mass of pure silver deposited on a metal object made into the cathode of the cell. round your answer to 3 significant digits. also, be sure your answer contains a unit symbol. ×10μ

Answers: 3

Answer

Physics, 22.06.2019 04:00

Determine the maximum r-value of the polar equation r =3+3 cos 0

Answers: 3

Answer

Physics, 22.06.2019 09:40

Aturntable a is built into a stage for use in a theatrical production. it is observed during a rehearsal that a trunk b starts to slide on the turntable 10 s after the turntable begins to rotate. knowing that the trunk undergoes a constant tangential acceleration of 0.31 m/s2, determine the coefficient of static friction between the trunk and the turntable.

Answers: 3

Answer

You know the right answer?

Aslender rod is 80.0 cm long and has mass 0.390 kg . a small 0.0200-kg sphere is welded to one end o...

Questions