Physics, 11.11.2019 07:31 YaBoiMando2061

Acar moving at 46 km/h skids 14 m with locked brakes. how far will the car skid with locked brakes at 92 km/h? assume that energy loss is due only to sliding friction. answer in units of m.

Answers: 3

Show answers

Answers

Answer from: jholland03

at 92 km/h the car will skid 56 meters

Explanation:

Notice that the only force acting to stop the car is the force of friction which we assume is the same in both cases because we deal with the same car under similar pavement/tire conditions. Therefore the negative acceleration that stops the car must be the same in both cases. we don't know that acceleration but can use the letter a to represent its magnitude in our equations.

We will also use the subindex "1" to represent the physical quantities associated with the equations of motion for the first case (car moving at 46 km/h) such that $v_1, \, t_1, x_1$ represent the velocity, time to stop, and distance traveled under the negatively accelerated motion in this first case.

Similarly, we represent with subindex "2" the physical quantities associated with the second case (car moving at 92 km/h) and for which we need to find the distance covered under negatively accelerated motion.

Equations of motion for the first case (car breaking - negative acceleration) from an initial velocity v_1 to rest (zero velocity). Lets start with the equation for the acceleration: $-a=\frac{0-v_1}{t_1} \\-a=\frac{-v_1}{t_1}\\t_1=\frac{-v_1}{-a} \\t_1=\frac{v_1}{a}$

We use this expression for the stopping time in the other equation of motion that involves the distance x_1 covered in the stopping process:

$x_1=v_1*t_1-\frac{1}{2} a*t_1^2\\x_1=v_1(\frac{v_1}{a}) -\frac{1}{2} a*(\frac{v_1}{a}) ^2\\x_1=\frac{v_1^2}{a} -\frac{1}{2} \frac{v_1^2}{a} \\x_1=\frac{1}{2} \frac{v_1^2}{a}$

We can extract from here the expression for the magnitude of the acceleration that, since it is the same as for the second case, we can use in the new equations of motion associated with it:

$a=\frac{v_1^2}{2*x_1}$

For the second case we do a similar study considering that the car goes from velocity v_2 to rest, in a time t_2 , and covering a distance x_2 (what we need to find):

$-a=\frac{0-v_2}{t_2} \\-a=\frac{-v_2}{t_2}\\t_2=\frac{-v_2}{-a} \\t_2=\frac{v_2}{a}$

And in the equation for the distance covered:

$x_2=v_2*t_2-\frac{1}{2} a*t_2^2\\x_2=v_2(\frac{v_2}{a}) -\frac{1}{2} a*(\frac{v_2}{a}) ^2\\x_1=\frac{v_2^2}{a} -\frac{1}{2} \frac{v_2^2}{a} \\x_2=\frac{1}{2} \frac{v_2^2}{a}$

And we now use the expression for the magnitude of the acceleration from the first case (for which we know the distance covered) to replace it and find the new distance to full stop:

$x_2=\frac{1}{2} \frac{v_2^2}{a}\\x_2= \frac{1}{2}\frac{v_2^2\,2\,x_1}{v_1^2} \\x_2=\frac{v_2^2}{v_1^2} x_1$

We now just replace the values for the velocities and for the breaking distance for case 1. Notice that since we are dividing velocities that have the same units they cancel out and we don;t need to worry about converting units to the SI system. The answer for the breaking distance in case 2 will come in the same units as the breaking distance for case 1 (that is in meters). We proceed now to use the numerical values to get our

$x_2=\frac{v_2^2}{v_1^2} x_1\\x_2=\frac{92^2}{46^2} 14\\x_2=56$

Then, the car travelling at 92 km/h will skid 56 meters

Answer from: Quest

hujjujddf

Answer from: Quest

Show him another sport or something

Another question on Physics

Physics, 22.06.2019 12:50

Air is contained in a variable-load piston-cylinder device equipped with a paddle wheel. initially, air is at 400 kpa and 17°c. the paddle wheel is now turned by an external electric motor until 75 kj/kg of work has been transferred to air. during this process, heat is transferred to maintain a constant air temperature while allowing the gas volume to triple. calculate the required amount of heat transfer in kj/kg.

Answers: 2

Answer

Physics, 22.06.2019 16:20

How does a circuit breaker protect a refrigerator? a. when the current is too high, a metal strip in the fuse melts and opens the circuit. b. when the resistance is too high , a re-settable which opens a circuit c. when the current is too high , a re-settable switch opens the circuit d. when the resistance is too high a metal strip in the fuse melts and opens the circuit

Answers: 2

Answer

Physics, 22.06.2019 17:10

As the distance from a magnet increases, what happens to the magnet force?

Answers: 1

Answer

Physics, 22.06.2019 18:00

Consider two regions of space containing a static electric field, region a and region b. in region a the equipotential lines are more closely spaced than those in region b. what can be said about the relative strength of the electric field in the two regions? a) the electric field in region a is stronger th

Answers: 3

Answer

You know the right answer?

Acar moving at 46 km/h skids 14 m with locked brakes. how far will the car skid with locked brakes a...

Questions