subject
Physics, 18.11.2019 17:31 alissa3329

A3-ft-diameter duct is used to carry ventilating air into a vehicular tunnel at a rate of 9000 ft3/min. tests show that the pressure drop is 1.5 in. of water per 1500 ft of duct. what is the value of the friction factor for this duct and the approximate size of the equivalent roughness of the surface of the duct?

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 08:20
The bubba chump shrimp company processes and packages shrimp for sale to wholesale seafood distributors. the shrimp are transported to the main plant by trucks that carry 1,000 pounds (lb) of shrimp. once the continuous flow processing of the shrimp begins, no inventory is allowed in buffers due to spoilage and all of the shrimp must be processed within 12 hours to prevent spoilage. the processing begins at the sorter, where the trucks dump the shrimp onto a conveyor belt that feeds into the sorter, which can sort up to 500 lb per hour. the shrimp then proceed to the desheller, which can process shrimp at the rate of 400 lb per hour. however, after 3 hours and 45 minutes of processing, the desheller must be stopped for 15 minutes to clean out empty shrimp shells that have accumulated. the veins of the shrimp are then removed in the deveining area at a maximum rate of 360 lb per hour. the shrimp proceed to the washing area, where they are processed at 750 lb per hour. finally, the shrimp are packaged and frozen. what is the daily process capacity of the processing plant (excluding the packaging and freezing)?
Answers: 2
question
Physics, 22.06.2019 14:00
Often called simply "velocity," this is the velocity of an object at a particular moment in time.
Answers: 1
question
Physics, 22.06.2019 15:00
Lightning is an example of what phenomenon? a release of a large amount of energy an absorption of a large amount of energy a natural electric circuit a natural electric current
Answers: 1
question
Physics, 22.06.2019 16:50
Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1Γ—105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =
Answers: 1
You know the right answer?
A3-ft-diameter duct is used to carry ventilating air into a vehicular tunnel at a rate of 9000 ft3/m...
Questions
question
Mathematics, 26.02.2021 21:30
question
Mathematics, 26.02.2021 21:30
question
Social Studies, 26.02.2021 21:30
question
Mathematics, 26.02.2021 21:30
question
Mathematics, 26.02.2021 21:30
question
History, 26.02.2021 21:30
Questions on the website: 13722362