The 150-mm-thick wall of a gas-fired furnace is constructed of fireclay brick (k = 1.5 w/m k, = 2600 kg/m3, cp = 1000 j/kg k) and is well insulated at its outer surface. the wall is at a uniform initial temperature of 20°c, when the burners are fired and the inner surface is exposed to products of combustion for which t[infinity] = 950°c and h = 100 w/m2 k. (a) how long does it take for the outer surface of the wall to reach a temperature of 750°c? (b) plot the temperature distribution in the wall at the foregoing time, as well as at several intermediate times.
Answers: 2
Physics, 22.06.2019 10:30
The precision of a laboratory instrument is ± 0.05 g. the accepted value for your measurement is 7.92 g. which measurements are in the accepted range? check all that apply. 7.85 g 7.89 g 7.91 g 7.97 g 7.99 g
Answers: 1
Physics, 22.06.2019 15:30
The radius of a sphere is increasing at a rate of 9 cm/ sec. find the radius of the sphere when the volume and the radius of the sphere are increasing at the same numerical rate.
Answers: 1
Physics, 22.06.2019 19:30
Amass m = 74 kg slides on a frictionless track that has a drop, followed by a loop-the-loop with radius r = 18.4 m and finally a flat straight section at the same height as the center of the loop (18.4 m off the ground). since the mass would not make it around the loop if released from the height of the top of the loop (do you know why? ) it must be released above the top of the loop-the-loop height. (assume the mass never leaves the smooth track at any point on its path.) 1. what is the minimum speed the block must have at the top of the loop to make it around the loop-the-loop without leaving the track? 2. what height above the ground must the mass begin to make it around the loop-the-loop? 3. if the mass has just enough speed to make it around the loop without leaving the track, what will its speed be at the bottom of the loop? 4. if the mass has just enough speed to make it around the loop without leaving the track, what is its speed at the final flat level (18.4 m off the ground)? 5. now a spring with spring constant k = 15600 n/m is used on the final flat surface to stop the mass. how far does the spring compress?
Answers: 3
Physics, 23.06.2019 00:40
Aforce of 8,480 n is applied to a chart to accelerate it at a rate of 26.5 m/s2. what is the mass of the cart?
Answers: 1
The 150-mm-thick wall of a gas-fired furnace is constructed of fireclay brick (k = 1.5 w/m k, = 2600...
Mathematics, 21.01.2020 22:31
English, 21.01.2020 22:31
Chemistry, 21.01.2020 22:31
Chemistry, 21.01.2020 22:31
History, 21.01.2020 22:31
Computers and Technology, 21.01.2020 22:31