Aseries circuit has two 10-ohm bulb is added in a series. technician a says that the three bulbs will be dimmer than when only two bulbs were in the cricut. technician b says that the cureent in the circuit will increase. which technician is correct?

Technician  A  is right. The situation will happens even with only two bulbs in series

Explanation:

We must take into account that

1.- All electric device need its nominal voltage to operate

2.-Any and all electric device means an electric load for the source in terms of equation that means any device will implies a drop voltage of V = I*R ( I the flows current and R  the resistance of the device)

3.-Nominal voltage for bulbs are specify for houses voltages you find between fase and neutral wires for instance in Venezuela 120 (v).

4.-In a imaginary circuit of only one bulb, the nominal voltage will be applied and the bulb will operates correctly, but when you add another bulb (in series) the nominal voltage will split  between the two bulbs ( we  could find a situation such as the first bulb work properly but the second one does not). The voltage split according to Ohms law (in such way that the sum of voltage between the terminal of the first bulb plus the voltage at terminals of the second one are equal to nominal voltage.

For that reason all the bulbs are connected in parallel in wich case all of them will operate with the common voltage

explanation:

as the height from which the ruler was dropped increased, the speed of the ruler at ryan's hand increased.