Physics, 21.11.2019 21:31 rubend7769

Espresso is a coffee beverage made by forcing steam through finely ground coffee beans. modern espresso makers generate steam at very high pressures and temperatures, but in this problem we'll consider a low-tech espresso machine that only generates steam at 100? c and atomospheric pressure--not much good for making your favorite coffee beverage.
the amount of heat q needed to turn a mass m of room temperature ( t1) water into steam at 100? c ( t2) can be found using the specific heat c of water and the heat of vaporization hv of water at 1 atmosphere of pressure.
suppose that a commercial espresso machine in a coffee shop turns 1.50 kg of water at 22.0? c into steam at 100? c. if c=4187j/(kg? ? c) and hv=2,258kj/kg, how much heat q is absorbed by the water from the heating resistor inside the machine?
assume that this is a closed and isolated system.
express your answer in joules to three significant figures.
q = j

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 21:30

Aquantity of gas has a volume of 1.5 m3 and an absolute pressure of 95 kpa. when the gas is compressed to a volume of 0.5 m3, what is the new absolute pressure of the gas? (assume that there’s no change in temperature.)

Answers: 3

Answer

Physics, 22.06.2019 09:40

(a) assume the equation x = at^3 + bt describes the motion of a particular object, with x having the dimension of length and t having the dimension of time. determine the dimensions of the constants a and b. (use the following as necessary: l and t, where l is the unit of length and t is the unit of time.) (b) determine the dimensions of the derivative dx/dt = 3at^2 + b. (use the following as necessary: l and t, where l is the unit of length and t is the unit of time.)

Answers: 1

Answer

Physics, 22.06.2019 17:30

Atruck driver is attempting to deliver some furniture. first, he travels 8 km east, and then he turns around and travels 3 km west. finally, he turns again and travels 13 km to his destination. what is the drivers total displacement?

Answers: 1

Answer

Physics, 23.06.2019 03:00

A75-hp (shaft output) motor that has an efficiency of 91.0 percent is worn out and is to be replaced by a high-efficiency motor that has an efficiency of 95.4 percent. the motor operates 4368 hours a year at a load factor of 0.75. taking the cost of electricity to be $0.12/kwh, determine the amount of energy and money saved as a result of installing the high-efficiency motor instead of the standard motor. also, determine the simple payback period if the pu

Answers: 1

Answer

You know the right answer?

Espresso is a coffee beverage made by forcing steam through finely ground coffee beans. modern espre...

Questions