Medical cyclotrons need efficient sources of protons to inject into their center. in one kind of ion source, hydrogen atoms (i. e., protons with one orbiting electron) are fed into a chamber where there is a strong magnetic field. electrons in this chamber are trapped in tight orbits, which greatly increases the chance that they will collide with a hydrogen atom and ionizes it. one such source uses a magnetic field of 70 mt, and the electrons' kinetic energy is 1.2 ev. if the electrons travel in a plane perpendicular to the field, what is the radius of their orbits?

A1,200 kg car is accelerated at 3.7 m/s2. what force was needed to produce this acceleration? a. 4,440 n b. 324.3 n c. 4,388 n d. 304.3 n

Use the table to answer question 22 23 and 24.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)