Physics, 06.12.2019 01:31 cottoncandy465

Block 1 has mass m1= 460 g, block 2 has mass m2= 500 g, and the pulley, which is mounted on a horizontal axle with negligible friction, has radius r= 5.00 cm. when released fromrest, block 2 falls 0.750 m in 5.00 s without the cord slipping on the pulley.

Answers: 3

Show answers

Answers

Answer from: jjdj5218

a. a=0.06m/s^2

b. T1 = 4.62N

c. T2 = 4.97N

d. $\alpha=1.20rad/s^2$

e. I = 0.0146 kg.m^2

Explanation:

This question is incomplete. The original question was:

Block 1 has a mass m1 = 460 g, block 2 has mass m2 = 500 g, and the pulley, which is mounted on a horizontal axle with negligible friction,

has radius R = 5.00 cm. When released from rest, block 2 falls 0.750 m in 5.00 s without the cord slipping on the pulley.

(Do not treat the pulley as a uniform disk. Give your answers to three significant figures. Use these rounded values in subsequent calculations.)

a. What is the magnitude of the acceleration of the blocks?

b. What is the tension in the rope on block 1?

c. What is the tension in the rope on block 2?

d. What is the magnitude of the pulley's angular acceleration?

e. What is the rotational inertia?

We will use kinematics to calculate the acceleration of the blocks:

Y=Vo*t-1/2*a*t^2

Where Y=-0.75m; Vo = 0m/s; t = 5.00s

Solving for a:

a=-0.06m/s^2 The magnitude of the acceleration is and the acceleration of each block is

a1=0.06m/s^2 ; a2=-0.06m/s^2

By making a sum of forces on the block 1:

T1-m1*g=m1*a1 Solving for T1 and using g=10m/s^2 :

T1 = 4.62N

By making a sum of forces on the block 2:

T2-m2*g=m2*a2 Solving for T2 and using g=10m/s^2 :

T2 = 4.97N

Angular acceleration is given by:

$\alpha=a/R=1.2rad/s^2$

By making a sum of torques on the pulley, we get the inertia:

$T1*R-T2*R=-I*\alpha$ Solving for I:

$I=\frac{-R*(T1-T2)}{\alpha}$

I=0.0146kg.m^2

Answer from: leahandmaryssa

a) $\rm a_1 = 0.06\;m/sec^2\;\;and \;\; a_2 = - 0.06\;m/sec^2$

b) $\rm T_1 = 4.62\;N$

c) $\rm T_2 = 4.97\;N$

d) $\rm \alpha = 1.2 \;rad/sec^2$

e) $\rm I = 0.0146\;Kg.m^2$

Given :

Mass, $\rm m_1 = 460\;g$

Mass, $\rm m_2 = 500\;g$

Radius, R = 5 cm

When released from rest, block 2 falls 0.750 m in 5 sec without the cord slipping on the pulley.

Solution :

We know that,

$\rm S = ut + \dfrac{1}{2}at^2$

Now put the values of u, S and t and solve for a we get,

$\rm -0.75 = 0 +\dfrac{1}{2}a(5^2)$

$\rm a = -0.06\;m/sec^2$

So, acceleration of each block is,

$\rm a_1 = 0.06\;m/sec^2\;\;and \;\; a_2 = - 0.06\;m/sec^2$

Now for block 1,

$\rm T_1-m_1g = m_1a_1$ ----- (1)

Now put the values of $\rm a_1,\;m_1\;and\;g$ in equation (1),

$\rm T_1 = 4.62\;N$

Now for block 2,

$\rm T_2-m_2g = m_2a_2$ ----- (2)

Now put the values of $\rm a_2,\;m_2\;and\;g$ in equation (2),

$\rm T_2 = 4.97\;N$

Now for angular acceleration,

$\rm \alpha = \dfrac{a}{R}$

$\rm \alpha = 1.2 \;rad/sec^2$

Now sum of torques on the pulley is,

$\rm T_1R-T_2R = -I\alpha$

$\rm I = \dfrac{R(T_2-T_1)}{\alpha }$

$\rm I = 0.0146\;Kg.m^2$

For more information, refer the link given below

link

Answer from: Quest

a and b sometimes have a positive value

For which optical devices does d sometimes have a positive value

Answer from: Quest

Planck decided to assume that atoms could only vibrate at certain frequencies that were whole numbers eg 2f, 3f and so on. others used to think that atoms vibrate continuously

Another question on Physics

Physics, 22.06.2019 09:30

Acar drives toward the right over the top of a hill, as shown below. which arrow represents the centripetal acceleration? w x y z

Answers: 3

Answer

Physics, 22.06.2019 12:30

Awheel of mass 48 kg is lifted to a height of 0.8 m. how much gravitational potential energy is added to the wheel? acceleration due to gravity is g = 9.8 m/s2. a. 30.4 j b. 3.1 j c. 297.9 j d. 11,321 j

Answers: 1

Answer

Physics, 22.06.2019 16:40

Aparticle's position is given by x = 3.00 - 9.00t + 3t2, in which x is in meters and t is in seconds. (a) what is its velocity at t = 1 s? (b) is it moving in the positive or negative direction of x just then? (c) what is its speed just then? (d) is the speed increasing or decreasing just then? (try answering the next two questions without further calculation.) (e) is there ever an instant when the velocity is zero? if so, give the time t; if not, answer "0". (f) is there a time after t = 3 s when the particle is moving in the negative direction of x? if so, give the time t; if not, answer "0".

Answers: 3

Answer

Physics, 22.06.2019 19:10

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0

Answers: 2

Answer

You know the right answer?

Block 1 has mass m1= 460 g, block 2 has mass m2= 500 g, and the pulley, which is mounted on a horizo...

Questions