Amachinist turns the power on to a grinding wheel, which is at rest at time t = 0.00 s. the wheel accelerates uniformly for 10 s and reaches the operating angular velocity of the wheel is run at that angular velocity for 37 s and then power is shut off. the wheel decelerates uniformly at until the wheel stops. in this situation, the time interval of angular deceleration (slowing down) is closest to:

Complete Question:

A machinist turns the power on to a grinding wheel, which is at rest at time t = 0.00 s. The wheel accelerates uniformly for 10 s and reaches the operating angular velocity of 25 rad/s. The wheel is run at that angular velocity for 37 s and then power is shut off. The wheel decelerates uniformly at 1.5 rads/s2 until the wheel stops. In this situation, the time interval of angular deceleration (slowing down) is closest to

t= 16.7 sec.

Explanation:

As we are told that the wheel is accelerating uniformly, we can apply the definition of angular acceleration to its value:

γ = (ωf -ω₀) / t

If the wheel was at rest at t-= 0.00 s, the angular acceleration is given by the following equation:

γ = ωf / t = 25 rad/sec / 10 sec = 2.5 rad/sec².

When the power is shut off, as the deceleration is uniform, we can apply the same equation as above, with ωf = 0, and ω₀ = 25 rad/sec, and γ = -1.5 rad/sec, as follows:

γ= (ωf-ω₀) /Δt⇒Δt = (0-25 rad/sec) / (-1.5 rad/sec²) = 16.7 sec

the temperature and the pressure affect solubility. temperature affects by changing the properties of the solvent. the increase in pressure increases solubility, the decrease in pressure decreases solubility.

an electric circuit