The current required to stimulate the heart during ventricular fibrillation is about 110ma (1000ma = 1a). assuming that a conducting gel is used in conjunction with a defibrillator to overcome skin resistance, so that the main resistance of the body to an applied voltage is solely due to the internal resistance of the body, which is roughly around 300 ohms, what voltage is required for defibrillation? (note, the actual value used is 10-100 times this since the skin's large resistance cannot necessarily be neglected.)

Air is held within a frictionless piston-cylinder container, which is oriented vertically. the mass of the piston is 0.45 kg and the cross-sectional area is 0.0030 m2. initially (state 1) the pressure of the gas is sufficient to support the weight of the piston as well as the force exerted by the atmospheric pressure ( 101.32 kpa). the volume occupied by the air within the cylinder in state 1 is 1.00 liter. one end of a spring (with spring constant k = 1000 n/m) is attached to the top of the piston, while the other end of the spring is attached to a stage that can move vertically. initially the spring is undeflected and therefore exerts no force. then the stage is then moved quasistatically downward a distance of 10.0 cm, at which point the system reaches state 2. the piston-cylinder is not insulated; rather it remains in diathermal contact with the surroundings, which are at a constant temperature of 300 k. what is the change of pressure within the container?

The air that we breath is made mostly of which gaseous molecule

The precision of a laboratory instrument is ± 0.05 g. the accepted value for your measurement is 7.92 g. which measurements are in the accepted range? check all that apply. 7.85 g 7.89 g 7.91 g 7.97 g 7.99 g