Physics, 02.01.2020 21:31 parisaidan366

Technician a says that low compression on a single cylinder will cause an engine not to start. technician b says that low compression on a single cylinder means that the engine can be fixed with a tune-up. who is correct?

tech a

tech b

both a and b

neither a nor b

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 01:30

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Answers: 3

Answer

Physics, 22.06.2019 11:20

Sound is a disturbance that travels through a medium as a

Answers: 1

Answer

Physics, 22.06.2019 16:00

The process of predicting values that extend beyond the range of data points is called absolute value extrapolation interpolation prediction for any given: )

Answers: 2

Answer

Physics, 22.06.2019 22:50

Cyclotrons are widely used in nuclear medicine for producing short-lived radioactive isotopes. these cyclotrons typically accelerate h- (the hydride ion, which has one proton and two electrons) to an energy of 5 mev to 20 mev. this ion has a mass very close to that of a proton because the electron mass is negligible—about 1 2000 of the proton’s mass. a typical magnetic field in such cyclotrons is 1.9 t. (a) what is the speed of a 5.0-mev h-? (b) if the h- has energy 5.0 mev and b = 1.9 t, what is the radius of this ion’s circular orbit?

Answers: 1

Answer

You know the right answer?

Technician a says that low compression on a single cylinder will cause an engine not to start. techn...

Questions