Explain why, under some circumstances, it is not advisable to weld a structure that is fabricated with a 3003 aluminum alloy. hint: you may want to consult?

The 3003 aluminum alloy is made up of 1.25% Magnesium and 0.1% Copper. This combination is designed to increase the strength of the material over other types of alloys such as those of the 1000 series. This alloy provides a medium strength and can be educated by cold work.

The alloy is not heat treatable and generally has good formability, corrosion resistance and weldability.

However, being a material that hardens by cold work, welding a 3003 Aluminum structure will cause the body to undergo recrystallization which will generate a loss in the 'resistance' of the material and the force capable of withstanding. If this aluminum will be used for structural purposes, it should not be welded. It would be better to perform the structure with a 6061 aluminum, which has similar characteristics and is not so affected by welding.

air exerts forces on falling objects near earth’s surface.

explanation:

the term 'free falls' refer to object that are falling towards the earth, in a situation in which gravity is the only force acting on the object.

for an object in free fall, the acceleration is constant (g, the gravitational acceleration), and so the velocity of the object constantly increases.

for objects near earth's surface, there is always another force acting on the object: the resistance due to the air. this force is opposed to the direction of fall of the object, and it is proportional to the velocity of the object, so as the object falls down, this force increases up to a point when it balances the force of gravity, and the object continues its motion at constant velocity (called terminal velocity). since in this case gravity is not the only force acting on the object, we are not in a situation of free fall.