subject
Physics, 15.01.2020 17:31 maddynichole2017

The resistance and the magnitude of the current depend on the path that the current takes. the drawing shows three situations in which the current takes different paths through a piece of material. each of the rectangular pieces is made from a material whose resistivity is rho = 1.50 x 10-2 ω*m, and the unit of length in the drawing is l0 = 7 cm. each piece of material is connected to a 3.00-v battery. find (a) the resistance and (b) the current in each case.

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 02:00
Askydiver weighing 140 lb (including equipment) falls vertically downward from an altitude of 19,000 ft and opens the parachute after 18 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.55|v| when the parachute is closed and is of magnitude 14|v| when the parachute is open, where the velocity v is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. (a) find the speed of the skydiver when the parachute opens. (b) find the distance fallen before the parachute opens. (c) what is the limiting velocity vl after the parachute opens? (d) determine how long the sky diver is in the air after the parachute opens. (e) plot the graph of velocity versus time from the beginning of the fall until the skydiver reaches the ground.
Answers: 1
question
Physics, 22.06.2019 09:00
Infrared rays have a shorter wavelength than question 11 options: x-rays. ultraviolet rays. radio waves. gamma rays.
Answers: 1
question
Physics, 22.06.2019 11:00
Arowboat passenger uses an oar to push the boat off the dock by exerting a force of 40n for 3.0s. what impulse acts on the boat.
Answers: 1
question
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
You know the right answer?
The resistance and the magnitude of the current depend on the path that the current takes. the drawi...
Questions
question
Mathematics, 19.02.2021 05:10
question
Mathematics, 19.02.2021 05:10
question
Mathematics, 19.02.2021 05:10
question
Social Studies, 19.02.2021 05:10
question
Chemistry, 19.02.2021 05:10
Questions on the website: 13722360