The image to the left shows earth's major plates. a
geologist is studying a plate boundary ind...
Answers: 1
Physics, 22.06.2019 05:30
The a992 steel rod bc has a diameter of 50 mm and is used as a strut to support the beam. determine the maximum intensity w of the uniform distributed load that can be applied to the beam without risk of causing the strut to buckle. take f.s. = 2 against bucklin
Answers: 3
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
Physics, 16.09.2021 16:10
Mathematics, 16.09.2021 16:10
Biology, 16.09.2021 16:10
Mathematics, 16.09.2021 16:10
Mathematics, 16.09.2021 16:20
English, 16.09.2021 16:20
Physics, 16.09.2021 16:20
Mathematics, 16.09.2021 16:20
Geography, 16.09.2021 16:20
Computers and Technology, 16.09.2021 16:20
Engineering, 16.09.2021 16:20
Business, 16.09.2021 16:20