Two charges are located in the x – y plane. if q 1 = − 3.65 nc and is located at ( x = 0.00 m , y = 0.600 m ) , and the second charge has magnitude of q2 = 4.20 nc and is located at ( x = 1.10 m , y = 0.800 m ) , calculate the x and y components, ex and ey , of the electric field, → e , in component form at the origin, ( 0 , 0 ) . the coulomb force constant is 1/(4πϵ0 ) = 8.99 × 10^9 n ⋅ m^2 /c^2.

Jasmine is diving off a 3-meter springboard. her height in meters above the water when she is x meters horizontally from the end of the board is approximated by the equation h=-x^2+3x+3. what is the maximum height jasmine will reach on her dive?

Search coils and credit cards. one practical way to measure magnetic field strength uses a small, closely wound coil called a search coil. the coil is initially held with its plane perpendicular to a magnetic field. the coil is then either quickly rotated a quarter-turn about a diameter or quickly pulled out of the field. (a) derive the equation relating the total charge q that flows through a search coil to the magnetic-field magnitude b. the search coil has n turns, each with area a, and the flux through the coil is decreased from its initial maximum value to zero in a time ∆t. the resistance of the coil is r, and the total charge is q = i∆t, where i is the average current induced by the change in flux. (b) in a credit card reader, the magnetic strip on the back of a credit card is rapidly “swiped” past a coil within the reader. explain, using the same ideas that underlie the operation of a search coil, how the reader can decode the information stored in the pattern of magnetization on the strip. (c) is it necessary that the credit card be “swiped” through the reader at exactly the right speed? why or why not?

Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.