A student is observing the oscillations of a mass on the end of a spring. The spring has a force constant of 6 x 10-5N/m, and the mass is 0.15 kg. She pulls it 6 cm below equilibrium and lets it go. She now writes an equation which she believes describes the motion of the mass. In her description, the y axis is vertical, and UP is positive. Her equation is y = (3 cm) sin ( 0.02 sec-1 t + 3.14) (A) Does she have the amplitude right? If not, what was right? If yes, explain. (B) Does she have the frequency right? If not, what was right? If yes, explain. (C) Does she have the phase angle right? If not, what was right? If yes, explain.

Will a heavier bowling ball hit pins better than a lighter bsll

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

In order for the bug to fly through the air a force has to push the bug forward. identify this force. how does the bug produce