Consider an electrophysiology experiment in which a 0.200 ~mm0.200 mm diameter round silver wire is used as a stimulation electrode. In this experiment, a current of 4.69~ mA4.69 mA is applied through the wire. The density of free electrons in silver is 5.86 \times 10^{28}~ \frac{\text{electrons}}{m^3}5.86×10 28 m 3 electrons . Calculate the magnitude of the drift velocity of the electrons in the silver wire under these conditions. Enter your answer in units of \frac{\text{meters}}{\text{second}} second meters using calculator scientific notation (e. g., 1.23e-41.23e−4 for 0.0001230.000123).

Excuse ! extra points plus ! super desperate ! the position of an object does not move relative to a reference point. relative to the reference point the object _. a.) is not moving. b.) is moving.

Part a determine the magnitude of the x component of f using scalar notation. fx f x = nothing lb request answer part b determine the magnitude of the y component of f using scalar notation. fy f y = nothing lb request answer part c determine the magnitude of the z component of f using scalar notation. fz f z = nothing lb request answer provide feedback figure1 of 1a force vector acting on a ring attached to the ground is shown in the xyz space together with its x, y, and z components lying on the corresponding positive axes. the ring is located at the origin. force f is located in the first octant. f makes an angle of 60 degrees with its x component and an angle of 45 degrees with its y component. a force vector acting on a ring attached to the ground is shown in the xyz space together with its x, y, and z components lying on the corresponding positive axes. the ring is located at the origin. force f is located in the first octant. f makes an angle of 60 degrees with its x component and an angle of 45 degrees with its y component.

Asatellite component is in the shape of a cube with 10cm edges, has an evenly distributed mass of 2 kg and one bolt hole at each of four corners. if the maximum predicted random vibration environment is 10 grms, what bolt size would be a good choice for restraint? what other factors might drive bolt size besides force/stress?