Physics, 25.02.2020 06:03 dondre54

You are using a tuning fork of frequency 320 Hz. For one particular water level, you hear a loud sound when the fork is struck and positioned just above the open end of the tube. When the water level is lowered by 535 mm, you again hear a loud sound. What is the wavelength of the 320 Hz sound waves in the column of air

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 05:10

What do elements in a family tend to share. a.) similar periods b.) similar groups c.) similar atomic symbols d.) similar chemical properties and characteristics

Answers: 2

Answer

Physics, 23.06.2019 00:30

Which of the following statements are evidence that gases do not always behave ideally? check all that apply.? a. co2 gas becomes dry ice (solid co2) at 1 atm and –78.5 °c. b. when two gases are mixed, they follow dalton\'s law of partial pressures. c. at 4 k and 1 atm, helium is a liquid. d. it is impossible to compress a gas enough so that it takes up no volume.

Answers: 3

Answer

Physics, 23.06.2019 02:10

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.

Answers: 1

Answer

Physics, 23.06.2019 02:50

You are your friend move a new refrigerator into his kitchen. you apply a horizontal force of 252 n in the negative x direction to try and move the 56 kg refrigerator. the coefficient of static friction is 0.61. (a) how much static frictional force does the floor exert on the refrigerator? give both magnitude (in n) and direction. magnitude n direction (b) what maximum force (in n) do you need to apply before the refrigerator starts to move?

Answers: 1

Answer

You know the right answer?

You are using a tuning fork of frequency 320 Hz. For one particular water level, you hear a loud sou...

Questions