Physics, 28.02.2020 19:36 jamya62

The walls of a furnace are made of 1.3-ft-thick concrete (k = 0.64 Btu/h⋅ft⋅°F and α = 0.023 ft2/h). Initially, the furnace and the surrounding air are in thermal equilibrium at 70°F. The furnace is then fired, and the inner surfaces of the furnace are subjected to hot gases at 1800°F with a very large heat transfer coefficient. Determine how long it will take for the temperature of the outer surface of the furnace walls to rise to 70.1°F.

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 21:00

Iron reacts with sulfur to form iron sulfide. if 60 grams of iron reacts with sulfur to produce 90 grams of iron sulfide, how much sulfur has been used in the chemical reaction?

Answers: 3

Answer

Physics, 22.06.2019 06:30

Which features on mars point to the possibility of liquid water on the planet? impact craters with sharp rims volcanic cones with craters gullies and stream-like channels mountain ranges with faults

Answers: 1

Answer

Physics, 22.06.2019 11:30

(2) (a) you have a simple circuit that consists of only a battery (δvbat=1.5v) and two resistors with resistance r1=10ω and r2=5ω, connected in series with each other. what is the current running through the battery? (b) you re-arrange your circuit so now r2 is attached in parallel to r1 rather than in series. what is the current running through the battery? (c) you add an additional resistor r3=7ω on the same branch as r2. what is the current running through the battery? (d) what is the power dissipated in r3?

Answers: 3

Answer

Physics, 22.06.2019 12:10

Point charges q1 = 51 µc and q2 = −27 µc are placed 1.0 m apart, with q2 on the right. what is the force (in n) on a third charge q3 = 19 µc placed midway between q1 and q2? (assume the positive direction is to the right. indicate the direction with the sign of your answer.)

Answers: 3

Answer

You know the right answer?

The walls of a furnace are made of 1.3-ft-thick concrete (k = 0.64 Btu/h⋅ft⋅°F and α = 0.023 ft2/h)....

Questions

Physics, 09.12.2019 21:31

Amodel rocket is launched at an angle of 70° above the x axis, with an initial velocity of 40m/s. how far horizontally will the rocket travel? ...