Physics, 29.02.2020 01:14 beej543

A parallel-plate vacuum capacitor is connected to a battery and charged until the stored electric energy is . The battery is removed, and then a dielectric material with dielectric constant is inserted into the capacitor, filling the space between the plates. Finally, the capacitor is fully discharged through a resistor (a resistor is connected across the capacitor terminals).

A) Find , the energy dissipated in the resistor.
Express your answer in terms of and other given quantities.
B)Consider the same situation as in the previous part, except that the charging battery remains connected while the dielectric is inserted. (Part B figure) The battery is then disconnected and the capacitor discharged. For this situation, what is , the energy dissipated in the resistor?
Express your answer in terms of and other given quantities.

Answers: 2

Show answers

Answers

Answer from: brenyasanders4001

The energy dissipated in the resistor ${U_k} = \frac{U}{k}$

The energy dissipated in the resistor ${U_k} = kU$

Explanation:

In order to gain a good understanding of the solution above it is necessary to understand that the concept required to solve the question is energy stored in the parallel plate capacitor.

Initially, take the first case. In that, according to the formula for energy stored in parallel plate capacitor with the dielectric inserted between the two plates, find the energy stored. Then, find the energy stored in the parallel plate capacitor when no dielectric is present. Then, write the equation of energy stored in the capacitor with the dielectric present in the form of the energy stored in the capacitor without the dielectric present. The equation must not be in the form of voltage as battery is removed in this case.

For part B, use the equation of the energy dissipated in the resistor. Write it in the form of the equation for energy stored in the parallel plate capacitor without dielectric in it. The equation must be in the form of voltage as battery is kept connected. Looking at the fundamentals

The energy stored in the parallel plate capacitor with the dielectric is given by,

$U _k = \frac{1}{2} \frac{q ^2}{kC}$

Here, the energy stored in the capacitor will be equal to the energy dissipated in the resistor. In this equation, Uk is the energy dissipated in the resistor, q is charge, k is the dielectric constant, and C is the capacitance.

Now, the equation of the energy stored in the parallel plate capacitor without dielectric is,

$U= \frac{1}{2} \frac{q ^2}{C}$

In this equation, U is the energy stored in the parallel plate capacitor without dielectric, q is charge, and C is the capacitance.

For part B, the battery is still connected. Thus, the equation q = CV is used to modify the above equation.

Thus, the energy stored in the parallel plate capacitor with the dielectric is given by,

$U_ k = \frac{1}{2} \frac{k ^{2} C^ 2 V ^2}{kC} \\\\= \frac{1}{2} kCV ^2$

In this equation, is the energy dissipated in the resistor, V is voltage, k is the dielectric constant, and C is the capacitance.

The equation of the energy stored in the parallel plate capacitor without dielectric is,

$U= \frac{1}{2} \frac{C^ 2 V ^2}{C} \\\\= \frac{1}{2} CV ^2$

In this equation, U is the energy dissipated in the resistor, V is voltage, k is the dielectric constant, and C is the capacitance.

(A)

The equation for energy dissipated in the resistor is,

$U _k = \frac{1}{2} \frac{q ^2}{kC}$

Substitute $U = \frac{1}{2}\frac{{{q^2}}}{C}$ in the equation of ${U_k}$

$U _k = \frac{1}{2} (\frac{1}{k} )\frac{q ^2}{C} \\\\= (\frac{1}{k} ) \frac{q^2}{C}\\\\ U_{k} = \frac{U}{k}$

Note :

If the resistance relates to the capacitor, the energy stored in the capacitor is dissipated through the resistance. Thus, by substituting the equation of U, the expression is found out.

(B)

The equation for energy dissipated in the resistor is

$U_{k} = \frac{1}{2}kCV^2$

Here, V is voltage in the circuit.

Substitute $U =\frac{1}{2} CV^2$ in the equation of ${U_k}$

So,

$U_{k} = \frac{1}{2} kCV^2\\$

$= k(\frac{1}{2} CV^2)$

$U_{k} = kU$

Answer from: Quest

mass and volume are the answers you are looking for

Answer from: Quest

The answer is d, you can easily test a theory! hope i you : )

Another question on Physics

Physics, 22.06.2019 12:00

Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.

Answers: 1

Answer

Physics, 22.06.2019 16:00

Marvin records scientific data about lake superior. for which property has marvin forgotten to use an si unit of measurement? shore length high temperature low temperature annual precipitation

Answers: 3

Answer

Physics, 22.06.2019 18:30

Which form of cell division creates the sperm and egg, resulting in half of the chromosomes as the other cells?

Answers: 1

Answer

Physics, 22.06.2019 20:00

How are positive ions different from neutral atoms

Answers: 1

Answer

You know the right answer?

A parallel-plate vacuum capacitor is connected to a battery and charged until the stored electric en...