Physics, 29.02.2020 08:40 Tink2334

At time t= 0, a 3.0 kg particle with velocity v= (5.0 m/s)i - (6.0 m/s)j is at x = 3.0 m, y= 8.0m. it is pulled by a 7.0 N force in the negative x direction. About the origin, what are the particle's angular momentum, the torque acting on the particle and the rate at which the angular momentum is changing?

Answers: 3

Show answers

Answers

Answer from: ysabel0420

a) The angular momentum of the particle is $\vec L = -174\,\hat{k}\,\left[\frac{kg\cdot m}{s} \right]$ .

b) The torque acting on the particle is $\vec {\tau} = -56\,\hat{k}\,[N \cdot m]$ .

c) The rate at which the angular momentum is changing is $\vec {\tau} = -56\,\hat{k}\,[N \cdot m]$ .

a) The angular momentum of the particle ( $\vec L$ ), in kilograms-meter per second, is given by the following vectorial formula:

$\vec L = \vec r \,\times\, m\cdot \vec v$ (1)

Where:

$\vec r$ - Distance with respect to the origin, in meters.

- Mass, in kilograms. $\vec v$ - Velocity, in meters per second.

If we know that $\vec r = (3\,m, 8\,m, 0\,m)$ , $m = 3\,kg$ and $\vec v = \left(5\,\frac{m}{s}, -6\,\frac{m}{s}, 0\,\frac{m}{s} \right)$ , then the angular momentum of the particle is determined by determinants:

$\vec L = (3\,kg)\cdot \left|\begin{array}{ccc}\hat{i}&\hat{j}&\hat{k}\\3\,m&8\,m&0\,m\\5\,\frac{m}{s} &-6\,\frac{m}{s} &0\,\frac{m}{s} \end{array}\right|$

$\vec L = (3\,kg)\cdot \left[(3\,m)\cdot \left(-6\,\frac{m}{s} \right)-(8\,m)\cdot \left(5\,\frac{m}{s} \right)\right]\cdot \hat{k}$

$\vec L = -174\,\hat{k}\,\left[\frac{kg\cdot m}{s} \right]$

The angular momentum of the particle is $\vec L = -174\,\hat{k}\,\left[\frac{kg\cdot m}{s} \right]$ .

b) The torque ( $\vec \tau$ ), in newton-meters, acting on the particle is defined by the following expression:

$\vec {\tau} = \vec {r}\,\times\,\vec {F}$ (2)

Where $\vec F$ is the force, in newtons, acting on the particle.

If we know that $\vec r = (3\,m, 8\,m, 0\,m)$ and $\vec F = (-7\,N, 0\,N, 0\,N)$ , then the torque experimented by the particle is determined by determinants:

$\vec {\tau} = \left|\begin{array}{ccc}\hat{i}&\hat{j}&\hat{k}\\3&8&0\\-7&0&0\end{array}\right| \,[N\cdot m]$

$\vec {\tau} = -56\,\hat{k}\,[N \cdot m]$

The torque acting on the particle is $\vec {\tau} = -56\,\hat{k}\,[N \cdot m]$ .

c) The rate at which the angular momentum changes in time is found deriving (1):

$\vec {\dot L} = \vec {v} \,\times \,m\cdot \vec {v} + \vec {r}\,\times\,m\cdot \vec {a}$

$\vec{\dot {L}} = \vec O + \vec r \,\times \,\vec F$

$\vec {\dot L} = \vec r \,\times \,\vec F$

$\vec {\dot L} = \vec{\tau}$ (3)

In other words, the rate of a constant mass system at which the angular momentum changes is equal to the torque experimented by the particle. Hence, the rate at which the angular momentum changes is $\vec {\tau} = -56\,\hat{k}\,[N \cdot m]$ .

The rate at which the angular momentum is changing is $\vec {\tau} = -56\,\hat{k}\,[N \cdot m]$ .

We kindly invite to check this question on torque: link

Answer from: kiekie1986

Explanation:

The radius, velocity, and force vectors are:

r = (3.0 m) i + (8.0 m) j

v = (5.0 m/s) i − (6.0 m/s) j

F = (-7.0 N) i

Angular momentum is the cross product of the radius vector and the linear momentum vector:

L = r × p

L = r × (mv)

L = <(3.0 m) i + (8.0 m) j> × <(15 kg m/s) i + (-18 kg m/s) j>

L = (-174 kg m²/s) k

Torque is the cross product of the radius vector and the force vector:

τ = r × F

τ = <(3.0 m) i + (8.0 m) j> × <(-7.0 N) i + (0 N) j>

τ = (56 Nm) k

Rate of change of angular momentum is equal to the torque.

L' = τ

L' = (56 Nm) k

Answer from: Quest

see earlier answer

Answer from: Quest

gas and liquid

Another question on Physics

Physics, 22.06.2019 18:30

Adisk with a radius of r is oriented with its normal unit vector at an angle q with respect to a uniform electric field. which of the following would result in an increase in the electric flux through the disk? check all that apply? a. increasing the area of the disk b. decreasing the given orientation angle of the disk c. decreasing the strength of the electric field d. increasing the given orientation angle of the disk, but not exceeding an angle of 90

Answers: 1

Answer

Physics, 22.06.2019 19:20

On a hot saturday morning while people are working inside, the air conditioner keeps the temperature inside the building at 22degreesc. at noon the air conditioner is turned off, and the people go home. the temperature outside is a constant 33degreesc for the rest of the afternoon. if the time constant for the building is 4 hr, what will be the temperature inside the building at 4 : 00 font size decreased by 2 upper p . font size decreased by 2 upper m .? at 6 : 00 font size decreased by 2 upper p . font size decreased by 2 upper m .? when will the temperature inside the building reach 24degreesc? 324281

Answers: 3

Answer

Physics, 22.06.2019 21:30

In the illustration, which two simple machines are being used to enable the student to reach the door? a. inclined plane and pulley b lever and wheel-and-axle c pulley and lever d wheel-and axle and inclined plane

Answers: 1

Answer

Physics, 22.06.2019 21:30

What describes the formation of horizon b? a. forms at the surface b. features parent material c. undergoes the most change d. forms due to decomposed material i think the answer is c. undergoes the most change

Answers: 1

Answer

You know the right answer?

At time t= 0, a 3.0 kg particle with velocity v= (5.0 m/s)i - (6.0 m/s)j is at x = 3.0 m, y= 8.0m. i...

Questions