subject
Physics, 06.03.2020 08:12 jilliankoch9794

Determine the minimum work per unit of heat transfer from the source reservoir that is required to drive a heat pump with thermal energy reservoirs at 460 K and 540 K.

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 08:20
The bubba chump shrimp company processes and packages shrimp for sale to wholesale seafood distributors. the shrimp are transported to the main plant by trucks that carry 1,000 pounds (lb) of shrimp. once the continuous flow processing of the shrimp begins, no inventory is allowed in buffers due to spoilage and all of the shrimp must be processed within 12 hours to prevent spoilage. the processing begins at the sorter, where the trucks dump the shrimp onto a conveyor belt that feeds into the sorter, which can sort up to 500 lb per hour. the shrimp then proceed to the desheller, which can process shrimp at the rate of 400 lb per hour. however, after 3 hours and 45 minutes of processing, the desheller must be stopped for 15 minutes to clean out empty shrimp shells that have accumulated. the veins of the shrimp are then removed in the deveining area at a maximum rate of 360 lb per hour. the shrimp proceed to the washing area, where they are processed at 750 lb per hour. finally, the shrimp are packaged and frozen. what is the daily process capacity of the processing plant (excluding the packaging and freezing)?
Answers: 2
question
Physics, 22.06.2019 10:00
How many times did thomas edison mess up the light bulb
Answers: 1
question
Physics, 22.06.2019 21:30
Ateacher gives students four liquids commonly found in the kitchen - vinegar, apple juice, dish detergent, and milk - and ph indicator strips, which measure acidity. the teacher asks the students to put the liquids in order from most acidic to most basic. what type of investigation could the students conduct to determine the correct order for the liquids?
Answers: 3
question
Physics, 23.06.2019 03:00
A75-hp (shaft output) motor that has an efficiency of 91.0 percent is worn out and is to be replaced by a high-efficiency motor that has an efficiency of 95.4 percent. the motor operates 4368 hours a year at a load factor of 0.75. taking the cost of electricity to be $0.12/kwh, determine the amount of energy and money saved as a result of installing the high-efficiency motor instead of the standard motor. also, determine the simple payback period if the pu
Answers: 1
You know the right answer?
Determine the minimum work per unit of heat transfer from the source reservoir that is required to d...
Questions
question
Mathematics, 07.10.2021 08:00
question
Physics, 07.10.2021 08:00
Questions on the website: 13722359