Physics, 10.03.2020 08:04 tyneshiajones124

Derive the equation of motion of the block of mass m1 in terms of its displacement x. The friction between the block and the surface is negligible. The pulley has negligible inertia and negligible friction. The cylinder has a mass m2 and rolls without slipping. Hint: First determine the equivalent mass me of the system.

Answers: 1

Show answers

Answers

Answer from: jalenshayewilliams

the equivalent mass : $m_e = m_1+m_2+\frac{I}{R^2}$

the equation of the motion of the block of mass m_1 in terms of its displacement is = $(m_1+m_2+\frac{I}{R^2} )(\bar x) = (m_2gsin \phi) -(m_1gsin \beta)$

Explanation:

Let use m₁ to represent the mass of the block and m₂ to represent the mass of the cylinder

The radius of the cylinder be = R

The distance between the center of the pulley to center of the block to be = x

Also, the angles of inclinations of the cylinder and the block with respect to the ground to be $\phi$ and $\beta$ respectively.

The velocity of the block to be = v

The equivalent mass of the system = m_e

In the terms of the equivalent mass, the kinetic energy of the system can be written as:

$K.E = \frac{1}{2} m_ev^2$ --------------- equation (1)

The angular velocity of the cylinder = $\omega$ : &

The inertia of the cylinder about its center to be = I

The angular velocity of the cylinder can be written as:

$v = \omega R$

$\omega =\frac{v}{R}$

The kinetic energy of the system in terms of individual mass can be written as:

$K.E = \frac{1}{2}m_1v^2+\frac{1}{2} m_2v^2+\frac{1}{2}I\omega^2$

By replacing $\omega$ with $\frac{v}{R}$ ; we have:

$K.E = \frac{1}{2}m_1v^2+\frac{1}{2} m_2v^2+\frac{1}{2}I(\frac{v}{R})^2$

$K.E = \frac{1}{2}(m_1+ m_2+ \frac{I}{R} )v^2$ ------------------ equation (2)

Equating both equation (1) and (2); we have:

$m_e = m_1+m_2+\frac{I}{R^2}$

Therefore, the equivalent mass : $m_e = m_1+m_2+\frac{I}{R^2}$ which is read as;

The equivalent mass is equal to the mass of the block plus the mass of the cylinder plus the inertia by the square of the radius.

The expression for the force acting on equivalent mass due to the block is as follows:

$f_{block }=m_1gsin \beta$

Also; The expression for the force acting on equivalent mass due to the cylinder is as follows:

$f_{cylinder} = m_2gsin \phi$

Equating the above both equations; we have the equation of motion of the equivalent system to be

$m_e \bar x = f_{cylinder}-f_{block}$

which can be written as follows from the previous derivations

$(m_1+m_2+\frac{I}{R^2} )(\bar x) = (m_2gsin \phi) -(m_1gsin \beta)$

Finally; the equation of the motion of the block of mass m_1 in terms of its displacement is = $(m_1+m_2+\frac{I}{R^2} )(\bar x) = (m_2gsin \phi) -(m_1gsin \beta)$

Answer from: Quest

Pretty sure the answer is b : )

Answer from: Quest

dopamine..

"it was found that some people who were taking the drug l-dopa to raise their levels of dopamine were developing schizophrenic-like symptoms supporting research a strength of the dopamine hypothesis is that there are many studies which have shown support for the neurochemical explanation."

Another question on Physics

Physics, 22.06.2019 01:00

Avehicle has an oil leak that is causing the entire oil pan to be wet, but inspection reveals no exact source after cleaning off the oil residue. technician a says to install a fluorescent dye in the crankcase and operate the engine, then re-inspect for leaks with a special light (black light). technician b says the oil leak may be coming from a source at the top of the engine, such as a valve cover gasket. who is correct?

Answers: 1

Answer

Physics, 22.06.2019 08:00

Why is it important always to use horizontal bars in unit fractions when performing unit conversions?

Answers: 3

Answer

Physics, 22.06.2019 16:00

The solid that is formed and usually sinks to the bottom of a solution is the

Answers: 2

Answer

Physics, 23.06.2019 12:30

How is sound is different from music how loundness od sound mention some ways to reduce