Physics, 11.03.2020 02:52 yennie123

A small box of mass m1 is sitting on a board of mass m2 and length L. The board rests on a frictionless horizontal surface. The coefficient of static friction between the board and the box is μs. The coefficient of kinetic friction between the board and the box is, as usual, less than μs. Throughout the problem, use g for the magnitude of the acceleration due to gravity. In the hints, use Ff for the magnitude of the friction force between the board and the box. Find Fmin, the constant force with the least magnitude that must be applied to the board in order to pull the board out from under the the box (which will then fall off of the opposite end of the board).

Answers: 2

Show answers

Answers

Answer from: julio38

The constant force with least magnitude that must be applied to the board in order to pull the board out from under the box is $\left( {{m_1} + {m_2}} \right){\mu _{\rm{s}}}$

Explanation:

The Newton’s second law states that the net force on an object is the product of mass of the object and final acceleration of the object. The expression of newton’s second law is,

$\sum {F = ma}$

Here, is the sum of all the forces on the object, mm is mass of the object, and aa is the acceleration of the object.

The expression for static friction over a horizontal surface is,

$F_{\rm{f}}} \leq {\mu _{\rm{s}}}mg$

Here, ${\mu _{\rm{s}}}$ is the coefficient of static friction, mm is mass of the object, and is the acceleration due to gravity.

Use the expression of static friction and solve for maximum static friction for box of mass ${m_1}$

Substitute for in the expression of maximum static friction ${F_{\rm{f}}} = {\mu _{\rm{s}}}mg$

${F_{\rm{f}}} = {\mu _{\rm{s}}}{m_1}g$

Use the Newton’s second law for small box and solve for minimum acceleration aa to pull the box out.

Substitute for , [/tex]{m_1}[/tex] for in the equation .

${F_{\rm{f}}} = {m_1}a$

Substitute ${\mu _{\rm{s}}}{m_1}g$ for ${F_{\rm{f}}}$ in the equation ${F_{\rm{f}}} = {m_1}a$

${\mu _{\rm{s}}}{m_1}g = {m_1}a$

Rearrange for a.

$a = {\mu _{\rm{s}}}g$

The minimum acceleration of the system of two masses at which box starts sliding can be calculated by equating the pseudo force on the mass with the maximum static friction force.

The pseudo force acts on in the direction opposite to the motion of the board and the static friction force on this mass acts in the direction opposite to the pseudo force. If these two forces are cancelled each other (balanced), then the box starts sliding.

Use the Newton’s second law for the system of box and the board.

Substitute for for in the equation .

${F_{\min }} = \left( {{m_1} + {m_2}} \right)a$

Substitute for in the above equation .

${F_{\min }} = \left( {{m_1} + {m_2}} \right){\mu _{\rm{s}}}g$

The constant force with least magnitude that must be applied to the board in order to pull the board out from under the box is $\left( {{m_1} + {m_2}} \right){\mu _{\rm{s}}}g$

There is no friction between the board and the surface. So, the force required to accelerate the system with the minimum acceleration to slide the box over the board is equal to total mass of the board and box multiplied by the acceleration of the system.

Answer from: Quest

Wish i knew this to !

Answer from: Quest

answer

procedural programming, object-oriented programming

explanation

procedural programming is a type of computer programming language that specifies a series of well structured steps and procedures within its development period of time. it contains a systematic order of statements, functions and commands to complete a computational task or program. it is centered on creating procedures. while object oriented programming is a programming language that is centered on creating objects rather that actions and data rather than logic.. it has four principles which are inheritance, polymorphism, abstraction and encapsulation

Another question on Physics

Physics, 22.06.2019 06:20

Oxygen undergoes an isentropic expansion from 120 degree c and 280 kpa absolute to 140 kpa absolute. determine the final temperature of the oxygen and the amount of work per kg of o_2 produced in the process if it is adiabatic.

Answers: 1

Answer

Physics, 22.06.2019 09:00

Abicycle slows down when the rider applies the brakes. what type of energy transformation is involved in this example? a. kinetic energy into heat energy b. heat energy into potential energy c. potential energy into kinetic energy d. kinetic energy into mechanical energy

Answers: 1

Answer

Physics, 22.06.2019 09:20

Question 11 of 13 (1 point) jump to question: a stairway, ladder, or ramp must be present in excavations in which of the following situations? a. all trenches must have access/egress b. the trench is more than 15 feet wide but only 1 ½ feet deep c. the trench is more than 4 feet deep and the devices must be within 25 feet of all workers

Answers: 1

Answer

Physics, 22.06.2019 10:00

The frequencies refer to the sample data collected from a population of interest when performing a hypothesis test comparing two or more population proportions.

Answers: 2

Answer

You know the right answer?

A small box of mass m1 is sitting on a board of mass m2 and length L. The board rests on a frictionl...

Questions