Which is equal to the ideal mechanical advantage of a pulley system?

A. The number of rope segments supporting the load

B. The distance the load had to move

C. The length of the rope

D. The weight of the object being lifted

What are the phases shown in a and d called?

Um vetor representa um deslocamento cujo módulo é 20 m. se v faz um ângulo de 60 graus com a horizontal, qual é o valor das componentes horizontal e vertical deste vetor?

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)