Physics, 11.03.2020 16:24 kruegeremma22

Long cylindrical steel rods (rho = 7833 kg/m3 and cp = 0.465 kJ/kg·°C) of 8 cm diameter are heat-treated by drawing them at a velocity of 2 m/min through an oven maintained at 900°C. If the rods enter the oven at 30°C and leave at a mean temperature of 540°C, determine the rate of heat transfer to the rods in the oven.

Answers: 2

Show answers

Answers

Answer from: dontcareanyonemo

The heat transfer rate Q' is 311.26 kJ / s.

Explanation:

To determine the rate of heat transfer Q we will need the total heat transferred Q and the time it takes to transfer it t = 60 s.To determine the heat transfer Q we will use the energy balance equation. The only non-zero term in the equation is the internal energy change ΔU and to calculate it we will need the total mass of rod that is passing through the furnace m, the given capacity c = 0.465 kJ / kg°C, and the initial T1 = 30°C and final T2 = 540°C temperature.To determine the mass m we will need the volume of rod in the furnace V and the rod density ρ = 7833 kg /m^3. For volume we need the diameter of the rod d = 8 cm and the length of the piece of rod l = 2 m. Before the calculation we need to express the diameter in m^2 units.

d = 8 cm = 8 / 100 = 0.08 m

m = (πd^2 / 4) l ρ

m = (π (0.08)^2 / 4) (2)(7833)

m = 78.75 kg.

The heat transfer Q is

Q = m c (T2 - T1)

= (78.75) (0.465) (540 - 30)

= 18676 kJ

The heat transfer rate Q' is

Q' = Q / t

= 18676 / 60

Q' = 311.26 kJ / s.

Answer from: Quest

c) up is the direction the magnetic force is acting on the charge.

Answer from: Quest

find the surface area of the sphere to the nearest square unit. use a calculator.

a. 254 in.2

b. 64 in.2

c. 127 in.2

d. 1,018 in.2

Another question on Physics

Physics, 22.06.2019 02:50

Ammonia enters the expansion valve of a refrigeration system at a pressure of 10 bar and a temperature of 18oc and exits at 6.0 bar. the refrigerant undergoes a throttling process. determine the temperature, in oc, and the quality of the refrigerant at the exit of the expansion valve.

Answers: 3

Answer

Physics, 22.06.2019 10:00

There are two-speed cameras, one in an are where the speed limit is 30 km/h and another where the speed limit is 50 km/h. in which will there be a smaller time interval between the photographs? explain your answer.

Answers: 1

Answer

Physics, 22.06.2019 13:00

At a certain instant after jumping from the airplane a, a skydiver b is in the position shown and has reached a terminal (constant) speed vb = 52 m/s. the airplane has the same constant speed va = 52 m/s, and after a period of level flight is just beginning to follow the circular path shown of radius ρa = 2330 m. (a) determine the velocity and acceleration of the airplane relative to the skydiver. (b) determine the time rate of change of the speed vr of the airplane and the radius of curvature ρr of its path, both as observed by the nonrotating skydiver.

Answers: 3

Answer

Physics, 22.06.2019 16:20

Select the correct answer. what does the process of natural selection involve?

Answers: 1

Answer

You know the right answer?

Long cylindrical steel rods (rho = 7833 kg/m3 and cp = 0.465 kJ/kg·°C) of 8 cm diameter are heat-tre...

Questions