A steel spur pinion has a module of 2 mm, 17 teeth cut on the 20° full-depth system, and a face width of 20 mm. At a speed of 1650 rev/min, this pinion is expected to carry a steady load of 1.2 kW. Determine the bending stress.

this allows people to make the best decision or pursue the best option. when alternatives are weighed using their advantages and disadvantages, the option whose disadvantages outweigh the advantages (based on a qualitative or quantitative analysis) are shunned while those whose advantages outweigh their disadvantages are pursued.  

b would be the answer

the correct choice is a .

do not post any more test or exam questions on

  distance on the y-axis and time on the x-axis.

explanation:

the instantaneous velocity = change in position/time taken

the slope of the graph should give instantaneous velocity.

  slope of a graph = change in value of y -axis / change in values of x -axis

  comparing both the equations

    change in value of y -axis = change in position

  change in values of x -axis = time taken

so position values should be on the y axis and time values should be on the x axis.

distance on the y-axis and time on the x-axis.