Physics, 12.03.2020 05:02 bgallman153p71edg
A plate of thickness 2L= 30 mm at a temperature of 600°C is removed from a hot pressing operation and must be cooled rapidly to achieve the required physical properties. The process engineer plans to use air jets to control the rate of cooling. The air jets are applied on both sides of the plate. The air supply is at 25 °C, and the convection coefficient on the surface is 400 W/(m2 ∙K). The thermophysical properties of the plate are rho=3000 kg/m3 , c=750 J/(kg∙K), and k=15 W/(m∙K)
Answers: 2
Physics, 22.06.2019 14:00
Estimate the change in the gibbs energy and molar gibbs energy of 1.0dm3 of octane when the pressure acting on it is increased from 1.0 atm to 100 atm. the mass density of octane is 0.703 g cm−3
Answers: 3
Physics, 22.06.2019 15:30
What is a view of science and psychology that says the value of knowledge depends on its usefulness? a. pragmatism b. psychotherapy c. physiology
Answers: 2
Physics, 23.06.2019 03:00
The device shows the relative humidity at 22°c. what’s the water vapor density if the maximum water vapor in air at this temperature is 20 grams/cubic meter? a device showing that at 22 degrees celsius the relative humidity is 58%. a. 11.6% b. 11.6 g/m3 c. 12.76% d. 12.76 g/m3 reset next
Answers: 2
Physics, 23.06.2019 04:31
Ivana walks 2km north then turns around and walks 3km south
Answers: 1
A plate of thickness 2L= 30 mm at a temperature of 600°C is removed from a hot pressing operation an...
Social Studies, 28.01.2020 18:53
Computers and Technology, 28.01.2020 18:53
Social Studies, 28.01.2020 18:53
Biology, 28.01.2020 18:53
English, 28.01.2020 18:53
History, 28.01.2020 18:53
English, 28.01.2020 18:53
Mathematics, 28.01.2020 18:53
History, 28.01.2020 18:53