A negative charge, if free, will tend to move A) in the direction of the electric field. B) from high potential to low potential. C) toward infinity. D) from low potential to high potential. E) away from infinity.

An uncharged nonconductive hollow sphere of radius 18.0 cm surrounds a 12.0 µc charge located at the origin of a cartesian coordinate system. a drill with a radius of 1.00 mm is aligned along the z axis, and a hole is drilled in the sphere. calculate the electric flux through the hole.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Ahypothesis is? close agreement by competent observers of observations of the same phenomena. a guess that has been tested over and over again and always found to be true. an educated guess that has yet to be proven by experiment. the long side of a right triangle. a synthesis of a large collection of information that includes guesses.