Technician A says that an oxygen sensor can have one, two, three, four, or more wires, depending on the style and design. Technician B says that if the exhaust has little oxygen, the voltage of the oxygen sensor will be close to 1 volt (1000 mV) and close to zero if there is high oxygen content in the exhaust. Who is right?

Both technicians A and B are right.

Explanation:

-The most common application is to measure the exhaust-gas concentration of oxygen.The probe typically has four wires attached to it: two for the lambda output, and two. The number of wires depends on design and style.

-An oxygen sensor will typically generate up to about 0.9 volts() when the fuel mixture is rich and there is little unburned oxygen in the exhaust. When the mixture is lean, the sensor's output voltage will drop down to about 0.1( )volts

two charges are fixed in place on the x-axis as shown. the charge at x = 0 is negative and has magnitude q = 2 μcoulombs (1 μcoulomb = 10-6 coulombs). the charge at x = d, (d = +12 cm), is positive and has magnitude q = 4 μcoulombs. find a point x = xo along the x-axis at which the electric field is zero.

coil wire, increase current, put iron inside the coil