The Hubble Space Telescope is stabilized to within an angle of about 2-millionths of a degree by means of a series of gyroscopes that spin at 19,200 rpm. Although the structure of these gyroscopes is actually quite complex, we can model each of the gyroscopes as a thin-walled cylinder of mass 2.0 kg and diameter 5.0 cm, spinning about its central axis. How large a torque would it take to cause these gyroscopes to precess through an angle of 1.0×10−6 degree during a 5.0-hour exposure of a galaxy?

The answer to the question is;

The required torque that it would take to cause the gyroscopes to precess through an angle of 1.0×10−6 degree during a 5.0-hour exposure of a galaxy is 2.44 ×10⁻¹² N·m  

Explanation:

To solve the question we first resolve the units of the given quantities as follows

The gyroscopes spin at 19,200 rpm that is 19,200 revolutions per minute

1 revolution = 2π rad and

1 minute = 60 seconds

Therefore 19,200 revolutions per minute = 2π×19,200÷60 rad/s

= 2010.619 rad/s

The angle of precess is given as 1.0×10⁻⁶ °. We convert the angle to radians as follows

360 ° = 2π radians

1 ° = radians and

1.0×10⁻⁶ ° =   radians × 1.0×10⁻⁶ ° = 1.745×10⁻⁸ rad

To find the torque we note that the torque is given by

Precession angular speed × The moment of inertia × angular velocity

The precession angular speed is given by

The precession angle was determined in rad as 1.745×10⁻⁸ rad

The precession time is 5 hours which is equal to 5×60×60 = 18000 s

Therefore the precession velocity = =  9.696×10⁻¹³ rad/s

The moment of inertia is given by

Formula for the moment of inertia of a thin walled cylinder I = m·r²

Where:

r = Radius of the gyroscope = Diameter/2 = 5.0 cm/2 = 2.5 cm = ‪0.025‬ m

m = Mass of each gyroscopes = 2.0 kg

Therefore I = m·r² = 2.0 kg × (0.025‬ m)² = 0.00125 kg·m²

Torque, τ = Ω·I·ω

Where:

Ω = Precession velocity = 9.696×10⁻¹³ rad/s

I = Moment of inertia = 0.00125 kg·m²

ω = Angular speed = 2010.619 rad/s

τ = 9.696×10⁻¹³ rad/s × 0.00125 kg·m² × 2010.619 rad/s =

2.44 ×10⁻¹² kg·m²/ s² =   2.44 ×10⁻¹² N·m  

The required torque is 2.44 ×10⁻¹² N·m.

answer: the direction of the wind is expressed as the direction from which the wind is blowing. for example, easterly winds blow from east to west, while westerly winds blow from west to east.

explanation:

i need with 1.3.2 investigate cycling o2 and co2 apex

we need to see it