Physics, 24.03.2020 22:48 ani61

For your final exam in electronics, you’re asked to build an LC circuit that oscillates at 10 kHz. In addition, the maximum current must be 0.10 A and the maximum energy stored in the capacitor must be 1.0 x 10-5 J. What values of inductance and capacitance must you use?

Answers: 3

Show answers

Answers

Answer from: Apple557

Given the following data:

Frequency = 10 kHz

Maximum current = 0.10 Amps

Maximum energy = $1.0 \times 10^{-5}$ Joules

To find the values of inductance and capacitance that must be used for this LC circuit:

For the inductance:

Mathematically, the maximum energy stored in an inductor is given by the formula:

$E = \frac{1}{2} LI^2$

Answer from: BreBreDoeCCx

L= 2 mH

$C=1.26\times 10^{-7}\ F$

Explanation:

Given that

Frequency , f= 10 kHz

Maximum current ,I = 0.1 A

Maximum energy stored ,E= 1 x 10⁻⁵ J

The maximum energy stored in the inductor is given as follows

$E=\dfrac{1}{2}LI^2$

Where ,L= Inductance

I=Current

E=Energy

Now by putting the values in the above equation

$10^{-5}=\dfrac{1}{2}\times L\times 0.1^2$

$L=\dfrac{2\times 10^{-5}}{0.1^2}\ H$

L=0.002 H

L= 2 mH

We know that frequency f is given as

$2\pi f=\dfrac{1}{\sqrt{LC}}$

C=Capacitance , f=frequency ,L=Inductance

Now by putting the values

$2\pi \times 10\times 10^3=\dfrac{1}{\sqrt{0.002\times C} }$

$62831.85=\dfrac{1}{\sqrt{0.002\times C}}$

$\sqrt{0.002\times C=\dfrac{1}{62831.85}$

$0.002\times C=0.0000159^2$

$C=\dfrac{0.0000159^2}{0.002}\ F$

$C=1.26\times 10^{-7}\ F$

Therefore the inductance and capacitance will be 2 mH and 1.26 x 10⁻⁷ F respectively.

Answer from: Quest

6/12=1/2

step-by-step explanation:

Answer from: Quest

Is a vector quantity that refers to "the rate at which an object changes its position." imagine a person moving rapidly - one step forward and one step back - always returning to the original starting position. while this might result in a frenzy of activity, it would result in a zero velocity. because the person always returns to the original position, the motion would never result in a change in position. since velocity is defined as the rate at which the position changes, this motion results in zero velocity. if a person in motion wishes to maximize their velocity, then that person must make every effort to maximize the amount that they are displaced from their original position. every step must go into moving that person further from where he or she started. for certain, the person should never change directions and begin to return to the starting position.

Another question on Physics

Physics, 21.06.2019 23:20

The 5-kg cylinder is initially at rest when it is placed in contact with the wall b and the rotor at a. if the rotor always maintains a constant clockwise angular velocity v = 6 rad> s, determine the initial angular acceleration of the cylinder. the coefficient of kinetic friction at the contacting surfaces b and c is mk = 0.2.

Answers: 3

Answer

Physics, 21.06.2019 23:30

An object starts from rest at point f and speeds up continuously as it moves around an oval. a. choose a point about 1/8 th of the way around the oval from point f, and label it point g. draw a vector to represent the velocity of the object at point g. b. determine the change in velocity vector between points f and g.

Answers: 1

Answer

Physics, 22.06.2019 16:00

Marvin records scientific data about lake superior. for which property has marvin forgotten to use an si unit of measurement? shore length high temperature low temperature annual precipitation

Answers: 3

Answer

Physics, 22.06.2019 19:20

Two kilograms of air within a piston–cylinder assembly executes a carnot power cycle with maximum and minimum temperatures of 800 k and 300 k, respectively. the heat transfer to the air during the isothermal expansion is 60 kj. at the end of the isothermal expansion the volume is 0.4 m3. assume the ideal gas model for the air. determine the thermal efficiency, the volume at the beginning of the isothermal expansion, in m3, and the work during the adiabatic expansion, in kj.

Answers: 1

Answer

You know the right answer?

For your final exam in electronics, you’re asked to build an LC circuit that oscillates at 10 kHz. I...

Questions