How did the rock of the Great Plains and Rocky Mountains form? They gave me two sentences and I have to eliminate one

Formation of Plains

As mountains and hills erode, gravity combined with water and ice carry the sediments downhill, depositing layer after layer to form plains. Rivers form plains through related processes. As rivers erode rock and soil, they smooth and flatten the land they pass through.

Source: https://sciencing.com/great-plains-were-formed-5260966.html

this allows people to make the best decision or pursue the best option. when alternatives are weighed using their advantages and disadvantages, the option whose disadvantages outweigh the advantages (based on a qualitative or quantitative analysis) are shunned while those whose advantages outweigh their disadvantages are pursued.  

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).