Physics, 03.04.2020 16:51 driskell3

A machine part has the shape of a solid uniform sphere of mass 240 g and diameter 4.50 cm . It is spinning about a frictionless axle through its center, but at one point on its equator it is scraping against metal, resulting in a friction force of 0.0200 N at that point. Find its angular acceleration. Let the direction the sphere is spinning be the positive sense of rotation. How long will it take to decrease its rotational speed by 28.0 rad/s ?

Answers: 3

Show answers

Answers

Answer from: Jeiku3629

1) -9.3rad/s^2

2) 3.0 s

Explanation:

The angular acceleration of a rigid body in rotation can be found by using the equivalent of Newton's second law for rotational motions:

$\tau = I\alpha$ (1)

where

$\tau$ is the torque on the object

I is the moment of inertia of the object

$\alpha$ is the angular acceleration

Here we have:

$I=\frac{2}{5}MR^2$ is the moment of inertia of a solid sphere about its central axis, where

M = 240 g = 0.240 kg is the mass of the sphere

R = 4.50 cm /2= 2.25 cm = 0.0225 m is the radius of the sphere

$\tau = F r$ is the torque exerted by the frictional force, where

F=-0.0200 N is the force of friction (negative because the direction is opposite to the motion)

r = R = 0.0225 m is the distance of the point of application of the force from the centre

Substituting into eq(1) we find

$FR=\frac{2}{5}MR^2 \alpha$

And solving for $\alpha$ , we find the angular acceleration:

$\alpha = \frac{5F}{2MR}=\frac{5(-0.0200)}{2(0.240)(0.0225)}=-9.3rad/s^2$

Here we know that the motion of the sphere is an angular accelerated motion.

Therefore, we can use the equivalent of suvat equations for rotational motion:

$\omega_f = \omega_i +\alpha t$

where

$\omega_f$ is the final angular velocity

$\omega_i$ is the initial angular velocity

$\alpha$ is the angular acceleration

t is the time

In this problem, we know that

$\omega_f-\omega_i = -28.0 rad/s$ , since we are told that the rotational speed decreases by 28.0 rad/s

$\alpha=-9.3 rad/s^2$ is the angular acceleration of the sphere

Solving for t, we find how long it takes for the sphere to decelerate by 28.0 rad/s:

$t=\frac{\omega_f - \omega_i}{\alpha}=\frac{-28.0}{-9.3}=3.0 s$

Answer from: Quest

answer;

d. are made mostly of liquid

explanation;

-the general composition and structure planets includes; they have a thick gas and liquid layer covering a small,solid core. mostly the gases are hydrogen and helium atmosphere and layers of liquid hydrogen. for instance neptune and uranus are examples of the outer planets, they have a core covered by ice and ammonia.

-neptune's atmosphere is hydrogen and helium with a bit of methane so there is no oxygen to breath and the interior is made up of frozen water and ammonia with a rock and iron core. thus, there is no liquid water or solid surface to survive.

Answer from: Quest

A. they hold atoms together with a molecule.its a force that exist between molecules. hope this .

Another question on Physics

Physics, 22.06.2019 02:30

Agas contained within a piston-cylinder assembly undergoes three processes in series: process 12: compression with pv= constant from 1 bar and 1 liter to 4 bar. process 23: constant pressure expansion to 1 liter. process 31: constant volume calculate the pressure and volume at each state, and sketch the processes on a p-vdiagram labeled with pressure and volume values at each numbered stat

Answers: 2

Answer

Physics, 22.06.2019 02:50

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Answers: 3

Answer

Physics, 22.06.2019 06:10

Which transition by an electron will release the greatest amount of energy? oa ob oc od

Answers: 2

Answer

Physics, 22.06.2019 07:30

Clothes dryer uses about 7 amps of current from a 240 volt line. how much power does it use?

Answers: 1

Answer

You know the right answer?

A machine part has the shape of a solid uniform sphere of mass 240 g and diameter 4.50 cm . It is sp...