What is the difference between charging by contact and charging by induction in terms of electron transfer.

the main difference between charging by contact and charging by induction is that in the first case, the two objects are touching, while in the second case, the two objects do not touch

Explanation:

There are three methods of charging an object:

- Charging by friction: this is done by rubbing an object against another object. An example is when a plastic rod is rubbed with a wool cloth. When this is done, electrons are transferred from the wool to the rod, so both objects remain charged at the end of the process

- Charging by contact: this is done by putting in contact a charged object with a neutral, conducting object. In this case, the charges are transferred from the charged object to the neutral object; at the end of the process, the neutral object will also have a net electric charge, so it will be also charged.

- Charging by induction: in this case, we take a charged object, and a neutral object, and we place the two objects close to each other, but without touching. Let's assume that the charged object is negatively charged: in this case, the positive charges in the neutral object are attracted towards the negative charges of the charged object, while the negative charges of the neutral object are repelled away. As a result, the positive and negative charges in the neutral object split apart. If the object is connected to the ground, then negative charges move away, so the neutral object will remain positively charged.

Therefore, the main difference between charging by contact and charging by induction is that in the first case, the two objects are touching, while in the second case, the two objects do not touch.

-first use of geothermal energy occurred more than 10,000 years ago in north america by american paleo-indians

-the first industrial use of geothermal energy began near pisa, italy in late 18th century

-in 1904, italian scientist piero ginori conti invented the first geothermal electric power plant in which steam was used to generate the power

-with the above experiment, the first geothermal plant in usa started in 1922 with a capacity of 250 kilowatts

-however, in 1946 first ground-source geothermal heat pump installed at commonwealth building in portland, oregon

-during the 1960’s, pacific gas and electric began operation of first large scale geothermal power plant in san francisco, producing 11 megawatts

-in 1973, when oil crisis began many countries began looking for renewable energy sources and by 1980’s geothermal heat pumps (ghp) started gaining popularity in order to reduce heating and cooling costs

-as effect of climate change started showing results, governments of various countries joined hands to fight against it, for which kyoto protocol was signed in japan in 1997, laid out emission targets for rich countries and required that they transfer funds and technology to developing countries, 184 countries have ratified it

hope this